Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before orderin
.
2010.5.7
MPD6D10*S Specification
14
12.3. Storage
12.3.1. Please store the products in room where the temperature/humidity is stable and direct sunlight
cannot come in ,and use the products within 6 months after delivery. Avoid damp heated places
or such places where there are large temperature changes, because water may condense on
the products, the characteristics may be reduced in quality, and/or be degraded in the
solderability. If you store the products for a long time (more than 1 year), use caution because
the products may be degraded in the solderability and/or rusty. Please confirm solderability and
characteristics for the products regularly.
12.3.2. Please do not store the products in the places such as : in a dusty place, in a place exposed
directly to sea breeze, in a place in an atmosphere containing corrosive gas (Cl
2
, NH
3
, SO
2
, NO
X
and so on).
12.4. Operation Environment and Conditions
12.4.1. Operation Environment
The products are not waterproof, chemical-proof or rusts proof. In order to prevent leakage of
products and abnormal temperature increase of the products, do not use the products under the
following circumstances:
(1) in an atmosphere containing corrosive gas
(Cl
2
, NH
3
, SO
2
, NO
X
and so on)
(2) in a dusty place
(3) in a place exposed to direct sunlight
(4) in such a place where water splashes or in such a humid place where water
condenses.
(5) in a place exposed to sea breeze
(6) in any other places similar to the above (1) through (5)
12.4.2. Operation Conditions
Please use the products within specified values (power supply, temperature, input, output and
load condition, and so on). If you use the products over the specified values, it may break the
products, reduce the quality, and even if the products can endure the condition for short time, it
may cause degradation of the reliability. To insert fuse into input or Vin is recommended to
secure safety in any abnormality such as internal Isolated DC-DC Converter circuit broken down.
Please do not apply more voltage than one’s rated output from external circuit to output pins.
12.4.3. Handling
If you apply high static electricity over rated voltage or reverse voltage to the products, it may
cause defects in the products or degrade the reliability.
Please avoid the following items :
(1) over rating voltage apply, reverse voltage apply under measurement or not-enough
connection of 0 V(DC) line
(2) electrostatic discharge by production line and/or operators
(3)
electrified appliances by electrostatic induction
Do not give an excessive mechanical shock.
If you drop the products on the floor, etc., it may crack the core of inductors and monolithic
ceramic capacitors.
Do not give strong shocks such as drops in handling.
Flexibility of products is limited up to 0.2mm as bending the substrate
