Z8932301ZEM Datasheet Z8932301ZEM | P1-P3

CP97DSP3100 1

CUSTOMER PROCUREMENT SPECIFICATION

Z8932301ZEM 1

DSP FAMILY

EMULATOR– Z89323

FEATURES

■ Supported Devices:

Notes:

1. Requires hand-wiring the Z89323 Emulator board to your

target board’s socket or by using a daughterboard connect-

ed to JP2 and JP3.

2. Requires optional, separately purchased accessory kit,

Z8922300ZAC, from Zilog.

3. Requires optional, separately purchased accessory kit,

Z8937300ZAC, from Zilog.

■ ICEBOX Emulator Provides Source-Level Debugging

for DSP Codes.

■ Symbolic Disassembly in the Debug Window

■ Selectable Baud Rates – 9600 to 57.6 Kbps

■ Windows-Based User Interface

■ RS-232C Connector

■ Zilog Macro Cross Assembler (ZMASM)

– Structured Assembly and Data Code

– Source-Level Debug Support

– Built-In Register Equates

– Linker

GENERAL DESCRIPTION

Zilog's in-circuit emulators are interactive, Windows-orient-

ed development tools providing a real-time environment for

developing and debugging software. Also included is a full-

featured macro cross assembler to enhance programmer

productivity when used in conjunction with the Z89323 Em-

ulator.

The Emulator provides a hardware platform that is a signif-

icant improvement compared to software simulators. The

Emulator is faster in operation, making it more practical than

software simulators for code development.

The Z89323 Emulator, which supports the Z89323 family

of DSP processors listed above, provides essential timing

and I/O circuitry to simplify user emulation of the prototype

hardware and software product.

The Z89323 Emulator can be connected to a serial port

(COM1, COM2, COM3, or COM4) of the host computer,

and it uses Graphical User Interface (GUI) software.

Packages Emulation OTP Programming

44-Pin PLCC

Z89223/273

Z89273

44-Pin QFP Z89223

N/A

68-Pin PLCC

Z89323/373

Z89373

80-Pin QFP

Z89323/373

Z89373

Z89323 Emulator

Emulator– Z89323 Zilog

2 CP97DSP3100

SPECIFICATIONS

Operating Conditions

Operating Temperature: 20°C ±10°C

Supply Voltage: +5 VDC ±5% or 9VDC @

1.2A wall adaptor

Operating Humidity: 10-90% RH

(non-condensing)

Minimum Emulation Speed: 1 MHz

Maximum Emulation Speed: 20 MHz

Power Requirements

The emulator board has dual-power capability: 9VDC or

5.0VDC. If optional OTP programming is enabled and the

5.0VDC terminal is used, a 6.0VDC +/-5% @ 500 mA (typ-

ical) power source is also required.

Dimensions

Width: 5.25 in.

Length: 9.50 in.

Height: 0.50 in.

Serial Interface

RS-232C @ 9600, 19200 (default), 28800, or 57600 Baud

Rates

Emulation Memory

DSP = 64K words (maximum)

Number of Breakpoints

DSP = 256 (maximum)

HOST COMPUTER

Minimum Requirements

IBM PC (or 100-percent compatible) 386-based machine:

33 MHz

4 MB RAM

VGA Video Adapter

Hard Disk Drive (3.0 MB free space)

3.5-inch, High-Density (HD) Floppy Disk Drive

RS-232C COM Port

Mouse or Pointing Device

Microsoft Windows 3.1(Use with DSPICE software)

The following changes to the Minimum Requirements are

recommended for increased performance:

486- or Pentium-based machine

66 MHz (or faster)

8 MB of RAM (or more)

SVGA Video Adapter

Color Monitor

Printer

Microsoft Windows 95

KIT CONTENTS

Qty. Item

1 Z89323 Emulator Board

Cables/Pods

1 RS-232C Serial Cable, 9-Pin M-F

1 9VDC AC Adaptor

Host Software

DSP GUI Diskette

ZDS/Zilog Macro Cross Assembler Diskette

Documentation

Emulator User’s Manual

Zilog Macro Cross Assembler User’s Manual

Software License and Limited Warranty Agreement

Registration Card (2)

Z89323 Emulator

Zilog Emulator– Z89323

CP97DSP3100 3

ADDITIONAL REQUIRED ITEMS NOT SUPPLIED

■ Your Target Design

Typically, this is a wire-wrapped or printed-circuit

prototype that includes connectors that you can

connect to the emulator’s JP2 and JP3, or points

where you can connect with the emulator P6.

LIMITATIONS

1. Switching Emulators without quitting the GUI is not

supported and may cause unexpected results.

2. The Emulator breakpoint hardware does not

distinguish between instruction and data fetches.

Consequently, the breakpoint hardware triggers when

the address specified matches either an instruction or

data fetch.

Example:

0000 LD A, #%0006

0002 ADD A, #%0002

0003 LD Y, @A

0004 NOP

0005 NOP

0006 JP %0000

0008 NOP

Setting the breakpoint at %0008 and click GO causes

the code to break at %0004 due to the data fetch

address match during the prior instruction. This does

not occur when Animate Mode is on because the GUI

is not using the hardware breakpoints when in

Animate Mode.

3. “ROM PROTECT” option programming is temporarily

disabled.

4. The maximum loadable symbols is 32,768 provided

there is enough system resource (memory).

5. Although GUI , 3.00 and later support baud rates up to

57.6K baud, the actual maximum usable rate may be

less due to limitations of the users hardware and or

system software setup. The maximum usable rate is

determined by the users tolerance of the frequency of

communication errors.

6. The GUI does not recognize the PUSH and POP

instructions when entered in the In-Line Assembler

(Debug window). As a workaround, use “LD

STACK,xxx” for PUSH and “LD xxx,STACK” for POP.

P1-P3 P4-P4

Z8932301ZEM

Mfr. #:

Buy Z8932301ZEM

Manufacturer:

ZiLOG

Description:

Emulators / Simulators Z89 EMULATOR KIT

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet

Z8932301ZEM