Z89323 Emulator
Emulator– Z89323 Zilog
4 CP97DSP3100
PRECAUTIONS
1. The Emulator cannot be operated while performing
ESD/EMI testing on the target board.
2. For 386 PCs, set the baud rate to 19.2K or less
because Windows’ communication driver does not
guarantee “reliable” operation at more than 9600
baud. Selecting a high baud rate on some slower 386
machines may crash the Windows environment.
3. Breakpoint overshoot. The Debug window shows the
processor halting at one or two instructions past the
instruction where the breakpoint was set.
4. Do not start the Emulator with OTP in socket.
5. Executing GUI. The GUI will occasionally continue to
indicate “Executing” after a Halt instruction. Pushing
the GO button will then result in Executing. (Executing
showing at the top of the screen.)
© 1997 by Zilog, Inc. All rights reserved. No part of this document
may be copied or reproduced in any form or by any means
without the prior written consent of Zilog, Inc. The information in
this document is subject to change without notice. Devices sold
by Zilog, Inc. are covered by warranty and patent indemnification
provisions appearing in Zilog, Inc. Terms and Conditions of Sale
only. Zilog, Inc. makes no warranty, express, statutory, implied or
by description, regarding the information set forth herein or
regarding the freedom of the described devices from intellectual
property infringement. Zilog, Inc. makes no warranty of
merchantability or fitness for any purpose. Zilog, Inc. shall not be
responsible for any errors that may appear in this document.
Zilog, Inc. makes no commitment to update or keep current the
information contained in this document.
The software described herein is provided on an “as is” basis and
without warranty. Zilog accepts no liability for incidental or
consequential damages arising from use of the software.
Zilog’s products are not authorized for use as critical components
in life support devices or systems unless a specific written
agreement pertaining to such intended use is executed between
the customer and Zilog prior to use. Life support devices or
systems are those which are intended for surgical implantation
into the body, or which sustains life whose failure to perform,
when properly used in accordance with instructions for use
provided in the labeling, can be reasonably expected to result in
significant injury to the user.
Zilog, Inc. 210 East Hacienda Ave.
Campbell, CA 95008-6600
Telephone (408) 370-8000
FAX 408 370-8056
Internet: http://www.zilog.com
