www.irf.com 7
IR1175
Fig. 4 PLL loop filter component definitions
Example D: Rdt=10Kohms and Cdt=22pF will result in: Td=156.8 nsec
4 - PLL Damping factor calculations:
P = ππE-3 x Rf (KOhms) x C(nF) x fn(KHz)
Typical value for P is 0.707. (Critically damped)
5 - Advance timing:
Tadv(nsec) = RADV (KOhms)*10 - 10
Where RADV is resistance from RADV1 or RADV2 to ground.
Example C: RADV=10Kohms will result in Tadv=10*10 - 10 =90 nsec .
6- Dead time calculations:
Td(nsec)=0.69*Rdt(KOhms)*Cdt(pF) + 5 (For Vdd=5 V)
Where Rdt is resistance between pins DTIN1 and DTOUT1 or DTIN2 and
DTOUT2. Cdt is capacitance from DTIN1 or DTIN2 to ground.
3 - PLL Natural frequency:
ωωn =2ππfn(KHz)=
√√
Ichpump(uA) x Kvco_ac(KHz/V) / C(nF)
Choose Cf such that
