OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

ADZS-ICE-1000

P1-P3P4-P6P7-P9P10-P12P13-P15P16-P18P19-P21P22-P24P25-P27P28-P30P31-P32
ICE-1000/ICE-2000 Emulator User’s Guide 1-1
1 GETTING STARTED
This chapter provides the information needed to begin using Analog
Devices emulators.
Analog Devices emulators are not intended to be used in a
production environment.
This chapter includes the following sections.
• Contents of Emulator Package
Provides a list of components shipped with the emulator.
• PC Configuration
Describes the minimal PC requirements.
• Emulator Installation Tasks
Provides a step-by-step procedure for setting up the emulator hard-
ware and describes how to connect the emulators to your target
board.
• Configurator Software
Describes the target configurator utility.
• JTAG/SWD Frequency
Provides information on JTAG/SWD frequency limitations.
• Troubleshooting and Warranty
Points to an Engineer-to-Engineer Note for troubleshooting advice
and warranty information.
Contents of Emulator Package
1-2 ICE-1000/ICE-2000 Emulator User’s Guide
Contents of Emulator Package
The ICE-1000 emulator package contains the following items:
• ICE-1000 emulator
• 2-meter USB standard-A to mini-B cable
The ICE-2000 emulator package contains the following items:
• ICE-2000 emulator with enclosure
• 6-inch 0.05" cable assembly
• 10-pin to 14-pin adapter used for connecting to the legacy 0.1"
14-pin JTAG header
• 2-meter USB standard-A to mini-B cable
PC Configuration
For correct operation of the emulator, your computer must have the mini-
mal configuration:
•Windows7
• CrossCore Embedded Studio 1.1.0 (or higher) or VisualDSP++
5.1.1 (or higher)
ICE-1000/ICE-2000 Emulator User’s Guide 1-3
Getting Started
Emulator Installation Tasks
Perform the following tasks to install your emulator safely. Follow the
instructions in presented order to ensure correct operation of your soft-
ware and hardware.
1. Installing the Emulator Software
2. Configuring Operating Voltage of the JTAG/SWD Interface on an
ICE-1000
3. Configuring Operating Voltage of the JTAG/SWD Interface on an
ICE-2000
4. Verifying Driver Installation and Attaching to an Emulation
Target
5. Applying Power to the Emulator
Installing the Emulator Software
Install CCES 1.1.0 (or higher) or VisualDSP++ 5.1.1 (or higher) on your
computer. The software installation includes the USB driver needed for
the emulator hardware.
Note: If you connect to the ICE before installing the software, the Win-
dows driver wizard may not find the emulator driver.
P1-P3P4-P6P7-P9P10-P12P13-P15P16-P18P19-P21P22-P24P25-P27P28-P30P31-P32

ADZS-ICE-1000

Mfr. #:
Buy ADZS-ICE-1000
Manufacturer:
Analog Devices Inc.
Description:
Emulators / Simulators Low Cost USB-based JTAG Emulator
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet