NXP Semiconductors
PCA9545A/45B/45C
4-channel I
2
C-bus switch with interrupt logic and reset
© NXP Semiconductors N.V. 2014. All rights reserved.
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: salesaddresses@nxp.com
Date of release: 5 May 2014
Document identifier: PCA9545A_45B_45C
Please be aware that important notices concerning this document and the product(s)
described herein, have been included in section ‘Legal information’.
21. Contents
1 General description. . . . . . . . . . . . . . . . . . . . . . 1
2 Features and benefits . . . . . . . . . . . . . . . . . . . . 1
3 Ordering information. . . . . . . . . . . . . . . . . . . . . 2
3.1 Ordering options. . . . . . . . . . . . . . . . . . . . . . . . 2
4 Block diagram . . . . . . . . . . . . . . . . . . . . . . . . . . 3
5 Pinning information. . . . . . . . . . . . . . . . . . . . . . 4
5.1 Pinning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
5.2 Pin description . . . . . . . . . . . . . . . . . . . . . . . . . 5
6 Functional description . . . . . . . . . . . . . . . . . . . 6
6.1 Device address. . . . . . . . . . . . . . . . . . . . . . . . . 6
6.2 Control register. . . . . . . . . . . . . . . . . . . . . . . . . 7
6.2.1 Control register definition . . . . . . . . . . . . . . . . . 7
6.2.2 Interrupt handling . . . . . . . . . . . . . . . . . . . . . . . 8
6.3 RESET
input. . . . . . . . . . . . . . . . . . . . . . . . . . . 8
6.4 Power-on reset . . . . . . . . . . . . . . . . . . . . . . . . . 9
6.5 Voltage translation . . . . . . . . . . . . . . . . . . . . . . 9
7 Characteristics of the I
2
C-bus . . . . . . . . . . . . 10
7.1 Bit transfer . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
7.2 START and STOP conditions . . . . . . . . . . . . . 10
7.3 System configuration . . . . . . . . . . . . . . . . . . . 11
7.4 Acknowledge . . . . . . . . . . . . . . . . . . . . . . . . . 11
7.5 Bus transactions. . . . . . . . . . . . . . . . . . . . . . . 12
8 Application design-in information . . . . . . . . . 13
9 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . 14
10 Thermal characteristics . . . . . . . . . . . . . . . . . 14
11 Static characteristics. . . . . . . . . . . . . . . . . . . . 15
12 Dynamic characteristics . . . . . . . . . . . . . . . . . 17
13 Test information. . . . . . . . . . . . . . . . . . . . . . . . 19
14 Package outline . . . . . . . . . . . . . . . . . . . . . . . . 20
15 Soldering of SMD packages . . . . . . . . . . . . . . 23
15.1 Introduction to soldering . . . . . . . . . . . . . . . . . 23
15.2 Wave and reflow soldering . . . . . . . . . . . . . . . 23
15.3 Wave soldering. . . . . . . . . . . . . . . . . . . . . . . . 23
15.4 Reflow soldering. . . . . . . . . . . . . . . . . . . . . . . 24
16 Soldering: PCB footprints. . . . . . . . . . . . . . . . 26
17 Abbreviations. . . . . . . . . . . . . . . . . . . . . . . . . . 29
18 Revision history. . . . . . . . . . . . . . . . . . . . . . . . 29
19 Legal information. . . . . . . . . . . . . . . . . . . . . . . 30
19.1 Data sheet status . . . . . . . . . . . . . . . . . . . . . . 30
19.2 Definitions. . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
19.3 Disclaimers. . . . . . . . . . . . . . . . . . . . . . . . . . . 30
19.4 Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 31
20 Contact information. . . . . . . . . . . . . . . . . . . . . 31
21 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32