Internally Trimmed
Data Sheet
Rev. D Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 ©1979–2013 Analog Devices, Inc. All rights reserved.
Technical Support www.analog.com
FEATURES
Pretrimmed to ±0.5% maximum 4-quadrant error
All inputs (X, Y, and Z) differential, high impedance for
[(X
1
− X
2
)(Y
1
− Y
2
)/10] + Z
2
transfer function
Scale-factor adjustable to provide up to ×10 gain
Low noise design: 90 mV rms, 10 Hz to 10 kHz
Low cost, monolithic construction
Excellent long-term stability
APPLICATIONS
High quality analog signal processing
Differential ratio and percentage computations
Algebraic and trigonometric function synthesis
Accurate voltage controlled oscillators and filters
FUNCTIONAL BLOCK DIAGRAM
Figure 1.
GENERAL DESCRIPTION
The AD632 is an internally trimmed monolithic four-quadrant
multiplier/divider. The AD632B has a maximum multiplying
error of ±0.5% without external trims.
Excellent supply rejection, low temperature coefficients, and
long-term stability of the on-chip thin film resistors and buried
zener reference preserve accuracy even under adverse conditions.
The simplicity and flexibility of use provide an attractive alternative
approach to the solution of complex control functions.
The AD632 is pin-for-pin compatible with the industry
standard AD532 but with improved specifications and a fully
differential high impedance Z input. The AD632 is capable of
providing gains of up to ×10, frequently eliminating the need
for separate instrumentation amplifiers to precondition the
inputs. The AD632 can be effectively employed as a variable
gain differential input amplifier with high common-mode
rejection. The effectiveness of the variable gain capability is
enhanced by the inherent low noise of the AD632 at 90 µV rms.
PRODUCT HIGHLIGHTS
1. Guaranteed performance over temperature.
2. The AD632A and AD632B are specified for maximum
multiplying errors of ±1.0% and ±0.5% of full scale,
respectively, at +25°C and are rated for operation from
−25°C to +85°C.
3. Maximum multiplying errors of ±2.0% (AD632S) and
±1.0% (AD632T) are guaranteed over the extended
temperature range of −55°C to +125°C.
4. High reliability.
5. The AD632S and AD632T series are available with MIL-
STD-883 Level B screening.
6. All devices are available in either the hermetically sealed
TO-100 metal can or ceramic DIP package.
STABLE
REFERENCE
AND BIAS
+V
S
–V
S
TRANSFER FUNCTION
HIGH GAIN
OUTPUT
AMPLIFIER
OUT
TRANSLINEAR
MULTIPLIER
ELEMENT
0.75 ATTEN
V
O
= A – (Z
1
– Z
2
)
(X
1
– X
2
) (Y
1
– Y
2
)
10
A
V-I
X
1
X
2
V-I
Y
1
Y
2
V-I
Z
1
Z
2
V
OS
2.7kΩ
25kΩ
09040-007
