© 2007 Microchip Technology Inc. DS21808D-page 1
25AA080A/B, 25LC080A/B
Device Selection Table
Features
Max. clock 10 MHz
Low-power CMOS technology
1024 x 8-bit organization
16 byte page (‘A’ version devices)
32 byte page (‘B’ version devices)
Write cycle time: 5 ms max.
Self-timed ERASE and WRITE cycles
Block write protection
- Protect none, 1/4, 1/2 or all of array
Built-in write protection
- Power-on/off data protection circuitry
- Write enable latch
- Write-protect pin
Sequential read
High reliability
- Endurance: 1,000,000 erase/write cycles
- Data retention: > 200 years
- ESD protection: > 4000V
Pb-free and RoHS compliant
Temperature ranges supported;
Pin Function Table
Description
The Microchip Technology Inc. 25AA080A/B,
25LC080A/B (25XX080A/B
*
) are 8 Kbit Serial
Electrically Erasable PROMs. The memory is accessed
via a simple Serial Peripheral Interface (SPI)
compatible serial bus. The bus signals required are a
clock input (SCK) plus separate data in (SI) and data
out (SO) lines. Access to the device is controlled
through a Chip Select (CS
) input.
Communication to the device can be paused via the
hold pin (HOLD). While the device is paused, transi-
tions on its inputs will be ignored, with the exception of
chip select, allowing the host to service higher priority
interrupts.
The 25XX080A/B is available in standard packages
including 8-lead PDIP and SOIC, and advanced
packaging including 8-lead MSOP, and 8-lead TSSOP.
All packages are Pb-free and RoHS compliant.
Package Types (not to scale)
Part Number VCC Range Page Size Temp. Ranges Packages
25LC080A 2.5-5.5V 16 Byte I, E P, SN, ST, MS
25AA080A 1.8-5.5V 16 Byte I P, SN, ST, MS
25LC080B 2.5-5.5V 32 Byte I, E P, SN, ST, MS
25AA080B 1.8-5.5V 32 Byte I P, SN, ST, MS
- Industrial (I): -40°Cto +85°C
- Automotive (E): -40°C to +125°C
Name Function
CS
Chip Select Input
SO Serial Data Output
WP Write-Protect
VSS Ground
SI Serial Data Input
SCK Serial Clock Input
HOLD
Hold Input
VCC Supply Voltage
CS
SO
WP
V
SS
1
2
3
4
8
7
6
5
V
CC
HOLD
SCK
SI
PDIP/SOIC
(P, SN)
TSSOP/MSOP
CS
SO
WP
V
SS
1
2
3
4
8
7
6
5
V
CC
HOLD
SCK
SI
(ST, MS)
8K SPI Bus Serial EEPROM
*25XX080A/B is used in this document as a generic part
number for the 25AA080A/B, 25LC080A/B.
25XX080A/B
DS21808D-page 2 © 2007 Microchip Technology Inc.
1.0 ELECTRICAL CHARACTERISTICS
Absolute Maximum Ratings
(†)
VCC.............................................................................................................................................................................7.0V
All inputs and outputs w.r.t. V
SS ......................................................................................................... -0.6V to VCC +1.0V
Storage temperature .................................................................................................................................-65°C to 150°C
Ambient temperature under bias...............................................................................................................-65°C to 125°C
ESD protection on all pins..........................................................................................................................................4 kV
TABLE 1-1: DC CHARACTERISTICS
NOTICE: Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the
device. This is a stress rating only and functional operation of the device at those or any other conditions above those
indicated in the operational listings of this specification is not implied. Exposure to maximum rating conditions for an
extended period of time may affect device reliability.
DC CHARACTERISTICS
Industrial (I): TAMB = -40°C to +85°C VCC = 1.8V to 5.5V
Automotive (E): T
AMB = -40°C to +125°C VCC = 2.5V to 5.5V
Param.
No.
Sym. Characteristic Min. Max. Units Test Conditions
D001 V
IH1 High-level input
voltage
2.0 VCC +1 V VCC2.7V (Note)
D002 V
IH2 0.7 VCC VCC +1 V VCC< 2.7V (Note)
D003 VIL1 Low-level input
voltage
-0.3 0.8 V VCC2.7V (Note)
D004 VIL2 -0.3 0.2 VCC VVCC < 2.7V (Note)
D005 V
OL Low-level output
voltage
—0.4VIOL = 2.1 mA
D006 VOL —0.2VIOL = 1.0 mA, VCC < 2.5V
D007 VOH High-level output
voltage
VCC -0.5 V IOH = -400 μA
D008 I
LI Input leakage current ±1 μACS = VCC, VIN = VSS TO VCC
D009 ILO Output leakage
current
±1 μACS = VCC, VOUT = VSS TO VCC
D010 CINT Internal Capacitance
(all inputs and
outputs)
—7pFTAMB = 25°C, CLK = 1.0 MHz,
V
CC = 5.0V (Note)
D011 I
CC Read
Operating Current
6
2.5
mA
mA
VCC = 5.5V; FCLK = 10.0 MHz;
SO = Open
VCC = 2.5V; FCLK = 5.0 MHz;
SO = Open
D012 I
CC Write
3mAVCC = 5.5V
D013 Iccs
Standby Current
5
1
μA
μA
CS
= VCC = 5.5V, Inputs tied to VCC or
V
SS, TAMB = -40°C TO +125°C
CS
= VCC = 2.5V, Inputs tied to VCC or
V
SS, TAMB = -40°C TO +85°C
Note: This parameter is periodically sampled and not 100% tested.
© 2007 Microchip Technology Inc. DS21808D-page 3
25XX080A/B
TABLE 1-2: AC CHARACTERISTICS
AC CHARACTERISTICS
Industrial (I): T
AMB = -40°C to +85°C VCC = 1.8V to 5.5V
Automotive (E): T
AMB = -40°C to +125°C VCC = 2.5V to 5.5V
Param.
No.
Sym. Characteristic Min. Max. Units Test Conditions
1F
CLK Clock Frequency
10
5
3
MHz
MHz
MHz
4.5V VCC 5.5V
2.5V V
CC < 4.5V
1.8V V
CC < 2.5V
2T
CSS CS Setup Time 50
100
150
ns
ns
ns
4.5V V
CC 5.5V
2.5V V
CC < 4.5V
1.8V V
CC < 2.5V
3T
CSH CS Hold Time 100
200
250
ns
ns
ns
4.5V VCC 5.5V
2.5V V
CC < 4.5V
1.8V V
CC < 2.5V
4T
CSD CS Disable Time 50 ns
5 Tsu Data Setup Time 10
20
30
ns
ns
ns
4.5V V
CC 5.5V
2.5V V
CC < 4.5V
1.8V V
CC < 2.5V
6T
HD Data Hold Time 20
40
50
ns
ns
ns
4.5V VCC 5.5V
2.5V V
CC < 4.5V
1.8V V
CC < 2.5V
7T
R CLK Rise Time 500 ns (Note 1)
8T
F CLK Fall Time 500 ns (Note 1)
9T
HI Clock High Time 50
100
150
ns
ns
ns
4.5V VCC 5.5V
2.5V V
CC < 4.5V
1.8V V
CC < 2.5V
10 T
LO Clock Low Time 50
100
150
ns
ns
ns
4.5V VCC 5.5V
2.5V V
CC < 4.5V
1.8V V
CC < 2.5V
11 T
CLD Clock Delay Time 50 ns
12 T
CLE Clock Enable Time 50 ns
13 T
V Output Valid from Clock
Low
50
100
160
ns
ns
ns
4.5V VCC 5.5V
2.5V V
CC < 4.5V
1.8V V
CC < 2.5V
14 T
HO Output Hold Time 0 ns (Note 1)
15 T
DIS Output Disable Time
40
80
160
ns
ns
ns
4.5V VCC 5.5V (Note 1)
2.5V V
CC < 4.5V (Note 1)
1.8V V
CC < 2.5V (Note 1)
16 T
HS HOLD Setup Time 20
40
80
ns
ns
ns
4.5V VCC 5.5V
2.5V V
CC < 4.5V
1.8V V
CC < 2.5V
Note 1: This parameter is periodically sampled and not 100% tested.
2: This parameter is not tested but ensured by characterization. For endurance estimates in a specific
application, please consult the Total Endurance™ Model which can be obtained from our web site:
www.microchip.com.
3: T
WC begins on the rising edge of CS after a valid write sequence and ends when the internal write cycle
is complete.

25AA080B-I/MS

Mfr. #:
Manufacturer:
Microchip Technology
Description:
EEPROM 1kx8 8k 32B Pg 1.8V
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union