Data Sheet ADM8611/ADM8612/ADM8613/ADM8614/ADM8615
Rev. D | Page 7 of 17
Figure 5. ADM8613 Pin Configuration
Table 6. ADM8613 Pin Function Descriptions
Pin No. Mnemonic Description
A1 VCC
Power Supply Input. The voltage on the VCC pin is monitored on the ADM8613. It is recommended to place a
0.1 μF decoupling capacitor as close as possible to the device between the VCC pin and the GND pin.
A2 GND Ground.
B1 WDI Watchdog Timer Input.
B2 WD_DIS
Watchdog Function Disable Input. Tie this pin high to disable the watchdog function of the device. Connect
this pin to ground if it is not used.
C1
MR
Manual Reset Input, Active Low.
C2
RESET
Active Low, Open-Drain RESET Output.
Figure 6. ADM8614 Pin Configuration
Table 7. ADM8614 Pin Function Descriptions
Pin No. Mnemonic Description
A1 VCC
Power Supply Input. The voltage on the VCC pin is monitored on the ADM8614. It is recommended to place a
0.1 μF decoupling capacitor as close as possible to the device between the VCC pin and the GND pin.
A2 GND Ground.
B1 WDI Watchdog Timer Input.
B2 WD_DIS
Watchdog Function Disable Input. Tie this pin high to disable the watchdog function of the device. Connect this
pin to ground if it is not used.
C1 WDT_SEL
Watchdog Timeout Selection Input. Pull this pin high to extend the watchdog timeout period of the ADM8614 to
100 sec. Pull this pin low to return the watchdog timeout period to its base value. Toggling WDT_SEL resets the
watchdog timer.
C2
RESET
Active Low, Open-Drain RESET Output.
MR
VCC GND
WDI
RESET
TOP VIEW
(BALL SIDE DOWN)
Not to Scale
1
A
B
C
2
BALL
1
INDICATOR
WD_DIS
12782-004
VCC GND
WDT_SEL
WDI
RESET
TOP VIEW
(BALL SIDE DOWN)
Not to Scale
1
A
B
C
2
BALL
1
INDICATOR
WD_DIS
12782-007