14
FN8111.0
March 28, 2005
ABSOLUTE MAXIMUM RATINGS
Temperature under bias.................... -65°C to +135°C
Storage temperature ......................... -65°C to +150°C
Voltage on any pin with
respect to V
SS
...................................... -1.0V to +7V
D.C. output current...............................................5mA
Lead temperature (soldering, 10 seconds)........ 300°C
COMMENT
Stresses above those listed under “Absolute Maximum
Ratings” may cause permanent damage to the device.
This is a stress rating only; functional operation of the
device (at these or any other conditions above those
listed in the operational sections of this specification) is
not implied. Exposure to absolute maximum rating con-
ditions for extended periods may affect device reliability.
RECOMMENDED OPERATING CONDITIONS
Temperature Min. Max.
Commercial 0°C 70°C
Industrial –40°C +85°C
Table 2:
Version
Chip Supply Volt-
age
Monitored*
Voltages
X40010/11
-A or -B
2.7V to 5.5V 2.6V to 5V
X40010/11-C 2 7V to 5 5V 1V to 3 6V
D.C. OPERATING CHARACTERISTICS
(Over the recommended operating conditions unless otherwise specified)
Symbol Parameter Min. Typ.
(4)
Max. Unit Test Conditions
I
CC1
(1)
Active Supply Current (V
CC
) Read 1.5 mA V
IL
= V
CC
x 0.1
V
IH
= V
CC
x 0.9,
f
SCL
= 400kHz
I
CC2
(1)
Active Supply Current (V
CC
) Read 3.0 mA
I
SB1
(1)(6)
Standby Current (V
CC
) AC (WDT off) 6 10 µA V
IL
= V
CC
x 0.1
VIH =
V
CC
x 0.9
f
SCL
, f
SDA
= 400kHz
I
SB2
(2)(6)
Standby Current (V
CC
) DC (WDT on) 25 30 µA V
SDA
= V
SCL
= V
CC
Others = GND or V
CC
I
LI
Input Leakage Current (SCL) 10 µA V
IL
= GND to V
CC
I
LO
Output Leakage Current (SDA,
V2FAIL
, WDO, RESET)
10 µA V
SDA
= GND to V
CC
Device is in Standby
(2)
V
IL
(3)
Input LOW Voltage (SDA, SCL) -0.5 V
CC
x 0.3 V
V
IH
(3)
Input HIGH Voltage (SDA, SCL) V
CC
x 0.7 V
CC
+ 0.5 V
V
HYS
(6)
Schmitt Trigger Input Hysteresis
• Fixed input level
•
V
CC
related level
0.2
.05 x V
CC
V
V
V
OL
Output LOW Voltage (SDA, RE-
SET/RESET
, V2FAIL, WDO)
0.4 V I
OL
= 3.0mA (2.7-5.5V)
I
OL
= 1.8mA (2.7-3.6V)
V
OH
Output (RESET) HIGH Voltage V
CC
- 0.8
V
CC
- 0.4
VI
OH
= -1.0mA (2.7-5.5V)
I
OH
= -0.4mA (2.7-3.6V)
V
CC
Supply
V
TRIP1
(5)
V
CC
Trip Point Voltage Range 2.0 4.75 V
4.55 4.6 4.65 V X40010/11-A
4.35 4.4 4.45 V X40010/11-B
2.85 2.9 2.95 V X40010/11-C,
X40014/15-A&C
2.55 2.6 2.65 V X40014/15-B
t
RPD2
(6)
V
TRIP2
to V2FAIL 5µS
X40010, X40011, X40014, X40015