OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

LQH32CH3R3M53L

P1-P3P4-P6P7-P7
Spec No. JELF243A-9106E-01 P.1/7
MURATA MFG.CO., LTD
Reference Only
CHIP COIL（CHIP INDUCTORS）LQH32CH□□□□53L
Murata Standard Reference Specification【AEC-Q200】
1.Scope
This Reference specification applies to LQH32CH_53L series, Chip coil (Chip Inductors) for automotive Electronics
based on AEC-Q200.
2.Part Numbering
(ex) LQ H 32 C H 1R0 M 5 3 L
Product ID
Structure
Dimension
Applications Category Inductance Tolerance Features
Electrode Packaging
(L×W)
and
L:Taping
Characteristics
3.Rating
Operating Temperature Range. – 40 °C to + 85 °C
Storage Temperature Range. – 40 °C to + 85 °C
Customer
Part Number
MURATA
Part Number
Inductance
DC
Resistance
(Ω)
Self
Resonant
Frequency
(MHz min)
Rated
Current
(mA)
ESD
Rank
5A: 8kV
(µH) Tolerance
LQH32CH1R0M53L 1.0
±20%
0.060±30% 100 1000
5A
LQH32CH2R2M53L 2.2 0.097±30% 64 790
LQH32CH3R3M53L 3.3 0.12±30% 50 710
LQH32CH4R7M53L 4.7 0.15±30% 43 650
LQH32CH6R8M53L 6.8 0.25±30% 32 540
LQH32CH100K53L 10
±10%
0.30±30% 26 450
LQH32CH150K53L 15 0.58±30% 26 300
LQH32CH220K53L 22 0.71±30% 19 250
∗When applied Rated current to the products , self temperature rise shall be limited to 20℃ max and Inductance
will be within ±10% of initial Inductance value.
4. Testing Conditions
《Unless otherwise specified》 《In case of doubt》
Temperature : Ordinary Temperature / 15°C to 35°C Temperature : 20°C± 2°C
Humidity
: Ordinary Humidity / 25%(RH) to 85%(RH) Humidity : 60%(RH) to 70%(RH)
Atmospheric Pressure : 86kPa to 106 kPa
5.
Appearance and Dimensions
■Unit Mass (Typical value)
0.045g
2.5 ± 0.2
2.5 ± 0.2
2.5 ± 0.2
1.55 ± 0.15
3.2 ± 0.3
0.9 ± 0.31.3 ± 0.2 0.9 ± 0.3
A
A
A : 2.8 max.
※
No marking.
Spec No. JELF243A-9106E-01 P.2/7
MURATA MFG.CO., LTD
Reference Only
6. Electrical Performance
No. Item Specification Test Method
6.1 Inductance
Inductance shall meet item 3. Measuring Equipment :
KEYSIGHT 4192A or equivalent
Measuring Frequency : 1MHz
6.2 DC
Resistance
DC Resistance shall meet item 3. Measuring Equipment : Digital multi meter
6.3 Self Resonant
Frequency
(S.R.F)
S.R.F shall meet item 3. Measuring Equipment :
KEYSIGHT E4991A or equivalent
7. AEC-Q200 Requirement
7.1 Performance (based on Table 5 for Magnetics(Inductors / Transformer)
AEC-Q200 Rev.D issued June. 1 2010
AEC-Q200
Murata Specification / Deviation
No Stress Test Method
3 High
Temperature
Exposure
1000hours at 85 deg C
Set for 24hours at room
temperature, then measured.
Meet Table A after testing.
Table A
4 Temperature
Cycling
1000cycles
-40 deg C to + 85deg C
Set for 24hours at room
temperature,then
measured.
Meet Table A after testing.
7 Biased Humidity 1000hours at 85 deg C,
85%RH
unpowered.
Meet Table A after testing.
8 Operational Life
A
pply 85 deg C 1000 hours
Set for 24hours at room
temperature, then measured
Meet Table A after testing.
9 External Visual
V
isual inspection No abnormalities
10 Physical
Dimension
Meet ITEM 5
（Style and Dimensions）
No defects
12 Resistance
t
o Solvents
Per
MIL-STD-202
Method 215
Not Applicable
13 Mechanical Shock Per MIL-STD-202
Method 213
Condition C:
100g’s/6ms/Half sine
Meet Table A after testing.
14
V
ibration 5g's for 20 minutes,
12cycles eah of 3 orientations
T
est from 10-2000Hz.
No defects
15 Resistance
t
o Soldering Hea
t
No-heating
Solder temperature
2
60C+/-5 deg C
Immersion time 10s
Murata deviation request :
Pre-heating: 150C+/-5C, 60s+/-5s
Meet Table A after testing.
Appearance No damage
Inductance change Within ±5%
DC Resistance
Change
Within ±5%
Spec No. JELF243A-9106E-01 P.3/7
MURATA MFG.CO., LTD
Reference Only
AEC-Q200
Murata Specification / Deviation
No Stress Test Method
17 ESD
Per AEC-Q200-002 ESD Rank: Refer to Item 3. Rating.
No defects
18 Solderbility Per J-STD-002 Method b : Not Applicable
90% of the terminations is to be soldered.
(Except exposed wire)
19 Electrical
Characterization
Measured : Inductance No defects
20 Flammability Per UL-94 Not Applicable
21 Board Flex Epoxy-PCB(1.6mm)
Deflection 2mm(min)
60s minimum holding time
Murata deviation request: 30s
No defects
22 Terminal Strength Per AEC-Q200-006
force of 17.7N for 60s
No defects
8. Specification of Packaging
8.1 Appearance and Dimensions of plastic tape
Dimension of the Cavity is measured at the bottom side.
8.2 Specification of Taping
(1) Packing quantity (standard quantity)
2,000 pcs / reel
(2) Packing Method
Products shall be packed in the each embossed cavity of plastic tape and sealed by cover tape.
(3) Sprocket hole
The sprocket holes are to the right as the tape is pulled toward the user.
(4) Spliced point
Plastic tape and Cover tape has no spliced point.
(5) Missing components number
Missing components number within 0.1 % of the number per reel or 1 pc., whichever is greater, and
are not continuous. The specified quantity per reel is kept.
8.3 Pull Strength
Embossed carrier tape 10N min.
Cover tape 5N min.
8.4 Peeling off force of cover tape
Speed of Peeling off 300mm / min
Peeling off force
0.2N to 0.7N
(minimum value is typical)
165 to 180 degree
F
Cover tape
Plastic tape
2.9±0.2
2.0±0.05
4.0±0.1
Direction of feed
※
Lead- in/out wire
4.0±0.1
3.6±0.2
8.0±0.2
1.75±0.13.5±0.05
φ
1.5
-0
+0.1
1.7±0.2
0.2
※
The packing directions of the chip coil
in taping are unified with the in/out
positions of the lead wire.
(0.2)
P1-P3P4-P6P7-P7

LQH32CH3R3M53L

Mfr. #:
Buy LQH32CH3R3M53L
Manufacturer:
Murata Electronics
Description:
Fixed Inductors 3.3uH 20% 1MHz
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet