SIT9120AC-1C3-25S166.600000X

The Smart Timing Choice
The Smart Timing Choice
SiT9120
Standard Frequency Differential Oscillator
Rev. 1.06 Page 7 of 8 www.sitime.com
Ordering Information
Supported Frequencies
25.000000 MHz 50.000000 MHz 74.175824 MHz 74.250000 MHz 75.000000 MHz 98.304000 MHz 100.000000 MHz 106.250000 MHz
125.000000 MHz 133.000000 MHz 133.300000 MHz 133.330000 MHz 133.333000 MHz 133.333300 MHz 133.333330 MHz 133.333333 MHz
148.351648 MHz 148.500000 MHz 150.000000 MHz 155.520000 MHz 156.250000 MHz 161.132800 MHz 166.000000 MHz 166.600000 MHz
166.660000 MHz 166.666000 MHz 166.666600 MHz 166.666660 MHz 166.666666 MHz 200.000000 MHz 212.500000 MHz
Ordering Codes for Supported Tape & Reel Packing Method
Device Size
8 mm T&R
(3ku)
8 mm T&R
(1ku)
8 mm T&R
(250u)
12 mm T&R
(3ku)
12 mm T&R
(1ku)
12 mm T&R
(250u)
16 mm T&R
(3ku)
16 mm T&R
(1ku)
16 mm T&R
(250u)
7.0 x 5.0 mm––––––TYX
5.0 x 3.2 mm T Y X
3.2 x 2.5 mm D E G T Y X
SiT9120AC -1C2-33E125.000000T
Frequency
See supported frequency list
below
Part Family
“SiT9120”
Revision Letter
“A” is the revision of Silicon
Temperature Range
“I” Industrial, -40 to 85
°C
Packaging:
“T”, “Y”, “X”, “D”, “E”, or “G
Refer to table below for
packing method
Leave Blank for Bulk
Package Size
Frequency Stability
“C” Extended Commercial, -20 to 70
°C
Signalling Type
Feature Pin
“E” for Output Enable
“S” for Standby
“25” for 2.5V ±10%
“33” for 3.3V ±10%
“XX” for 2.25V to 3.63V
“B” 3.2 x 2.5 mm x mm
“C” 5.0 x 3.2 mm x mm
“D” 7.0 x 5.0 mm x mm
1” = LVPECL
“2” = LVDS
“F” for
±10 ppm
“1” for ±20 ppm
“2” for ±25 ppm
“3” for ±50 ppm
Voltage Supply
Rev. 1.06 Page 8 of 8 www.sitime.com
© SiTime Corporation 2014. The information contained herein is subject to change at any time without notice. SiTime assumes no responsibility or liability for any loss, damage or defect of a
Product which is caused in whole or in part by (i) use of any circuitry other than circuitry embodied in a SiTime product, (ii) misuse or abuse including static discharge, neglect or accident, (iii)
unauthorized modification or repairs which have been soldered or altered during assembly and are not capable of being tested by SiTime under its normal test conditions, or (iv) improper
installation, storage, handling, warehousing or transportation, or (v) being subjected to unusual physical, thermal, or electrical stress.
Disclaimer: SiTime makes no warranty of any kind, express or implied, with regard to this material, and specifically disclaims any and all express or implied warranties, either in fact or by
operation of law, statutory or otherwise, including the implied warranties of merchantability and fitness for use or a particular purpose, and any implied warranty arising from course of dealing or
usage of trade, as well as any common-law duties relating to accuracy or lack of negligence, with respect to this material, any SiTime product and any product documentation. Products sold by
SiTime are not suitable or intended to be used in a life support application or component, to operate nuclear facilities, or in other mission critical applications where human life may be involved
or at stake. All sales are made conditioned upon compliance with the critical uses policy set forth below.
CRITICAL USE EXCLUSION POLICY
BUYER AGREES NOT TO USE SITIME'S PRODUCTS FOR ANY APPLICATION OR IN ANY COMPONENTS USED IN LIFE SUPPORT DEVICES OR TO OPERATE NUCLEAR FACILITIES
OR FOR USE IN OTHER MISSION-CRITICAL APPLICATIONS OR COMPONENTS WHERE HUMAN LIFE OR PROPERTY MAY BE AT STAKE.
SiTime owns all rights, title and interest to the intellectual property related to SiTime's products, including any software, firmware, copyright, patent, or trademark. The sale of SiTime products
does not convey or imply any license under patent or other rights. SiTime retains the copyright and trademark rights in all documents, catalogs and plans supplied pursuant to or ancillary to the
sale of products or services by SiTime. Unless otherwise agreed to in writing by SiTime, any reproduction, modification, translation, compilation, or representation of this material shall be strictly
prohibited.
The Smart Timing Choice
The Smart Timing Choice
Standard Frequency Differential Oscillator
SiT9120
Revision History
Version Release Date Change Summary
1.01 2/20/13 Original
1.02 11/23/13 Added input specifications, LVPECL/LVDS waveforms, packaging T&R options
1.03 2/6/14 Added 8mm T&R option
1.04 3/3/14 Added ±10 ppm
1.05 7/23/14 Include Thermal Consideration Table
1.06 10/3/14 Modified Thermal Consideration values
The Smart Timing Choice
The Smart Timing Choice
SiTime Corporation 990 Almanor Avenue, Sunnyvale, CA 94085 (408) 328-4400 www.sitime.com
Supplemental Information
The Supplemental Information section is not part of the datasheet and is for informational purposes only.

SIT9120AC-1C3-25S166.600000X

Mfr. #:
Manufacturer:
Description:
MEMS OSC XO 166.6000MHZ LVPECL
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union