OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

MLX90288KDC-CAA-000-SP

P1-P3P4-P6P7-P9P10-P12P13-P15P16-P18P19-P19
MLX90288
SMD Programmable Linear Hall Sensor IC
Featuring Analog Ratiometric Output
3901090288 Page 16 of 19
Rev 002 May/12
9 Package Specification
9.1 Package Dimensions
• Package Type: SOIC-8 (8-pin Small Outline Integrated Circuit Package)
• Die placement accuracy is ± 2 mils = ± 50 microns.
Figure 4: Package Dimensions
9.2 Package Marking
The package is labelled for traceability purposes, as depicted in Figure 5.
The first line is reserved for the project number at Melexis, 90288 followed by the ASIC silicon version. The
line below refers to the wafer fab. The bottom line is the date code indicating when the bare dies were
packaged at the assembly house. The black dot indicates the position of pin #1.
• MXXXXX = 5-digit lot number (M = wafer fab)
• YYWW = last 2 digits of the year, followed by the calendar week
MLX90288
SMD Programmable Linear Hall Sensor IC
Featuring Analog Ratiometric Output
3901090288 Page 17 of 19
Rev 002 May/12
Figure 5: Package markings
9.3 Pinout
Pin #
Direction
Type
1 VDD POWER Supply
2 VSS GND Ground
3 N/C / Not connected
4 OUT OUT/IN Analog + PTC communication
5 IDDQ OUT/IN Test
6 TESTOUT OUT Test
7 MUST0 IN Test
8 MUST1 IN Test
Table 9: Pinout
The pinout of the MLX90288 of the global pins is identical to that of the MLX90291 (PWM output), making
drop-in replacements possible for multi-protocol applications. Both ICs have differences in architecture, apart
from the protocol only.
MLX90288
SMD Programmable Linear Hall Sensor IC
Featuring Analog Ratiometric Output
3901090288 Page 18 of 19
Rev 002 May/12
10 Recommended Application Diagram
Figure 6: Recommended Application Diagram
The testpins (#5, #6, #7, #8) need to be grounded to avoid the risk of the chip going into testmode because of
RF/noise entering the test controller on these pins. The test input pins have an internal pull-down resistor.
The recommended application diagram is not a mandatory design guide. For better ESD and EMC
performance external components can be modified for as long as the electrical specifications are followed
under Section 5.2. For good EMC performance the components should be placed as close as possible to the
IC.
P1-P3P4-P6P7-P9P10-P12P13-P15P16-P18P19-P19

MLX90288KDC-CAA-000-SP

Mfr. #:
Buy MLX90288KDC-CAA-000-SP
Manufacturer:
Melexis
Description:
Board Mount Hall Effect / Magnetic Sensors SMD Programmable Linear Hall Sensor IC - Analog Output
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet