13
Figure 35. Load pull contour plot for R1=56ohm
Figure 36. Load pull contour plot for R1=560ohm
14
MGA-631P8 Scattering Parameter and Noise Parameter Test Setup
Figure 37. Test Setup for S & Noise Parameters data, C3=5.6pF (Rohm MCH155A5R6CK)
Typical Noise Parameter, Vd=4V, Id=54mA, applicable to any R1 due to high reverse isolation
Freq FMIN GAMMA OPT
Rn/50(GHz) (dB) Mag Ang
0.5 0.41 0.35 10 0.13
0.9 0.38 0.21 17.6 0.13
1.9 0.80 0.39 37.2 0.14
2.0 0.86 0.42 29.6 0.18
2.4 1.02 0.41 34.1 0.21
3.0 1.24 0.37 34.4 0.28
Notes:
1. Fmin values at 2 GHz and higher are based on measurements while the Fmins below 2 GHz have been extrapolated. The Fmin values are based
on a set of 16 noise gure measurements made at 16 dierent impedances using an ATN NP5 test system. From these measurements a true Fmin
is calculated.
2. S and noise parameters are measured on PCB. The PCB material is 10 mils Roger RO4350. Figure 35 shows the input and output reference plane.
15
MGA631P8 Typical Scattering Parameters, Vd=4V, Id=54mA, R1=56ohm
Freq S11 S21 S12 S22
(GHz) Mag Ang Mag Ang Mag Ang Mag Ang
0.1 0.94 -11.1 23.02 155.7 0.003 47.9 0.63 -24.7
0.5 0.63 -25.3 10.46 117.6 0.011 48.7 0.37 -81.7
1.0 0.53 -23.4 5.38 110.3 0.014 37.1 0.30 -112.7
1.5 0.52 -25.0 3.59 113.4 0.015 39.5 0.27 -128.5
1.9 0.53 -28.7 2.92 118.6 0.016 35.0 0.27 -137.7
2.0 0.53 -29.7 2.76 118.7 0.016 35.3 0.27 -134.7
2.5 0.53 -34.8 2.45 122.6 0.015 34.0 0.29 -140.7
3.0 0.54 -40.0 2.09 125.5 0.015 34.9 0.33 -145.0
3.5 0.55 -44.7 1.93 128.3 0.016 36.7 0.38 -153.5
4.0 0.56 -48.5 1.71 130.9 0.017 32.4 0.44 -164.3
5.0 0.58 -56.9 1.53 132.4 0.022 28.7 0.48 167.6
6.0 0.61 -66.0 1.38 133.4 0.034 22.0 0.46 133.6
7.0 0.64 -77.7 1.33 132.4 0.053 11.5 0.39 87.3
8.0 0.71 -97.8 1.45 118.4 0.111 -8.7 0.28 1.6
MGA631P8 Typical Scattering Parameters, Vd=4V, Id=54mA, R1=91ohm
Freq S11 S21 S12 S22
(GHz) Mag Ang Mag Ang Mag Ang Mag Ang
0.1 0.94 -10.9 22.91 156.2 0.008 65.8 0.61 -25.3
0.5 0.64 -24.8 10.73 121.3 0.009 44.3 0.33 -70.4
1.0 0.54 -23.8 6.02 113.0 0.012 34.1 0.28 -89.1
1.5 0.53 -26.2 4.14 112.0 0.013 37.2 0.30 -103.4
1.9 0.52 -29.4 3.28 114.2 0.014 33.7 0.34 -115.7
2.0 0.53 -30.3 3.09 113.4 0.013 36.8 0.35 -116.6
2.5 0.53 -35.4 2.64 116.1 0.013 34.3 0.40 -130.4
3.0 0.53 -40.0 2.12 118.9 0.013 35.8 0.44 -141.6
3.5 0.54 -44.2 1.90 122.7 0.014 36.4 0.47 -153.9
4.0 0.55 -48.2 1.64 126.5 0.015 34.4 0.49 -166.2
5.0 0.58 -56.5 1.47 130.3 0.022 30.5 0.51 165.7
6.0 0.61 -65.8 1.34 132.4 0.033 23.2 0.48 132.7
7.0 0.64 -77.6 1.30 132.0 0.052 13.4 0.40 88.2
8.0 0.71 -97.5 1.42 118.0 0.111 -7.9 0.29 5.2
Notes:
1. S-parameters are measured on PCB. The PCB material is 10 mils Roger RO4350. Figure 35 shows the input and output reference plane.

MGA-631P8-BLKG

Mfr. #:
Manufacturer:
Broadcom / Avago
Description:
RF JFET Transistors GaAs RFIC LNA
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet