General Description Features
ICS9112A-16
1337L—12/09/08
TM
Block Diagram
Low Skew Output Buffer
Pin Configuration
• Zero input - output delay
• Frequency range 25 - 133 MHz (3.3V)
• High loop filter bandwidth ideal for Spread
Spectrum applications.
• Less than 200 ps Jitter between outputs
• Skew controlled outputs
• Skew less than 250 ps between outputs
• Available in 8 pin 150 mil SOIC
or 173 mil TSSOP package.
• 3.3V ±10% operation
The ICS9112A-16 is a high performance, low skew, low
jitter clock driver. It uses a phase lock loop (PLL)
technology to align, in both phase and frequency, the REF
input with the CLKOUT signal. It is designed to distribute
high speed clocks in PC systems operating at speeds
from 25 to
133 MHz.
ICS9112A-16 is a zero delay buffer that provides
synchronization between the input and output. The
synchronization is established via CLKOUT feed back to
the input of the PLL. Since the skew between the input and
output is less than +/- 350 pS, the part acts as a zero delay
buffer.
The ICS9112A-16 comes in an eight pin 150 mil SOIC or
173 mil TSSOP package. It has five output clocks. In the
absence of REF input, will be in the power down mode. In
this mode, the PLL is turned off and the output buffers are
pulled low. Power down mode provides the lowest power
consumption for a standby condition.
8 pin SOIC, TSSOP
