74HC4351; 74HCT4351
8-channel analog multiplexer/demultiplexer with latch
Rev. 3 — 9 July 2018 Product data sheet
1 General description
The 74HC4351; 74HCT4351 is a single-pole octal-throw analog switch (SP8T) suitable
for use in analog or digital 8:1 multiplexer/demultiplexer applications. The switch features
three digital select inputs (S0 to S2), eight independent inputs/outputs (Yn), a common
input/output (Z) and two digital enable inputs (E1 and E2). With E1 LOW and E2 HIGH,
one of the eight switches is selected (low impedance ON-state) by S0 to S2. The data
at the select inputs may be latched by using the latch enable input (LE). When LE is
HIGH the latch is transparent. When E1 is HIGH or E2 is LOW all 8 analog switches are
turned off. Inputs include clamp diodes. This enables the use of current limiting resistors
to interface inputs to voltages in excess of V
CC
.
2 Features and benefits
• Wide analog input voltage range from -5 V to +5 V
• Complies with JEDEC standard no. 7A
• Low ON resistance:
– 80 Ω (typical) at V
CC
- V
EE
= 4.5 V
– 70 Ω (typical) at V
CC
- V
EE
= 6.0 V
– 60 Ω (typical) at V
CC
- V
EE
= 9.0 V
• Logic level translation: to enable 5 V logic to communicate with ±5 V analog signals
• Typical ‘break before make’ built-in
• Address latches provided
• ESD protection:
– HBM JESD22-A114F exceeds 2000 V
– MM JESD22-A115-A exceeds 200 V
– CDM JESD22-C101E exceeds 1000 V
• Specified from -40 °C to +85 °C and -40 °C to +125 °C
3 Applications
• Analog multiplexing and demultiplexing
• Digital multiplexing and demultiplexing
• Signal gating