Nexperia
74HC4351; 74HCT4351
8-channel analog multiplexer/demultiplexer with latch
7 Functional description
Table 3. Function table
H = HIGH voltage level; L = LOW voltage level; X = don’t care; ↓ = HIGH-to-LOW LE transition.
Input
E1 E2 LE S2 S1 S0
Channel ON
H X X X X X none
X L X X X X none
L H H L L L Y0
L H H L L H Y1
L H H L H L Y2
L H H L H H Y3
L H H H L L Y4
L H H H L H Y5
L H H H H L Y6
L H H H H H Y7
L H L X X X
[1]
X X ↓ X X X
[2]
[1] Last selected channel “ON”.
[2] Select channels latched
8 Limiting values
Table 4. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to V
SS
= 0 V (ground).
Symbol Parameter Conditions Min Max Unit
V
CC
supply voltage
[1]
-0.5 +11.0 V
I
IK
input clamping current V
I
< -0.5 V or V
I
> V
CC
+ 0.5 V - ±20 mA
I
SK
switch clamping current V
SW
< -0.5 V or V
SW
> V
CC
+ 0.5 V - ±20 mA
I
SW
switch current -0.5 V < V
SW
< V
CC
+ 0.5 V - ±25 mA
I
EE
supply current - ±20 mA
I
CC
supply current - 50 mA
I
GND
ground current -50 - mA
T
stg
storage temperature -65 +150 °C
P
tot
total power dissipation SO20, SSOP20; T
amb
= -40 °C to +125 °C
[2]
- 500 mW
P power dissipation per switch - 100 mW
[1] To avoid drawing V
CC
current out of terminal Z, when switch current flows into terminals Yn, the voltage drop across the bidirectional switch must not
exceed 0.4 V. If the switch current flows into terminal Z, no V
CC
current will flow out of terminals Yn. In this case there is no limit for the voltage drop across
the switch, but the voltages at Yn and Z may not exceed V
CC
or V
EE
.
[2] For SO20 packages: above 70 °C the value of P
tot
derates linearly with 8 mW/K.
For SSOP20 packages: above 60 °C the value of P
tot
derates linearly with 5.5 mW/K.
74HC_HCT4351 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2018. All rights reserved.
Product data sheet Rev. 3 — 9 July 2018
5 / 25