Any Pin to GND .......................................................-0.3V to +6V
Continuous Current Into EN ...............................................10mA
Continuous Current Flowing Between V
DD
and OUT
(WLP Package) ................................................................1.2A
Continuous current flowing between V
DD
and OUT
(SOT23-5 Package) ..........................................................1.0A
Maximum Power Dissipation
WLP, Derate 9.58mW/°C above +70°C ....................... 766mW
SOT, Derate 3.90mW/°C above +70°C ..................312.60mW
4 WLP
Thermal Resistance (Multi-Layer Board)
Junction to Ambient (θ
JA
) .........................................104.41°C/W
5 SOT-23
Thermal Resistance (Multi-Layer Board)
Junction to Ambient (θ
JA
) .........................................255.90°C/W
Junction to Case (θ
JC
) ....................................................81°C/W
Operating Temperature Range ........................ -40°C to +125°C
Junction Temperature ...................................................... +150°C
Storage Temperature Range ............................ -65°C to +150°C
Reflow Soldering Peak Temperature (Pb-free) ............... +260°C
V
DD
= 3.3V, GND = 0V, EN = V
DD
, T
A
= -40°C to +125°C, unless otherwise noted. Typical values are at +25°C (Note 2)
PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS
Supply Voltage Range V
DD
Guaranteed by DV
ON_FRWD
1.5 5.5 V
Quiescent Current I
DD
EN = V
DD
, I
FORWARD
= 0 mA 7 18
µA
EN = V
GND
, I
FORWARD
= 0 mA 0.7 2.5
Quiescent Current in Reverse
Operation
Current drawn from V
DD
; V
OUT
- V
DD
= 0.1V -1.5 0.072 1.5
µA
Current drawn from OUT; V
OUT
- V
DD
= 0.1V 1.2 3.5
V
DD
Leakage Current
Current sourced into V
DD
; V
DD
= 0V,
V
OUT
= 5.5V
-5.5 -0.55 +2.5 µA
Forward Turn-On Threshold
Voltage
V
ON_FRWD
Voltage between V
DD
and OUT (V
DD
more
positive than OUT) I
FORWARD
= 1mA
18 40 mV
Forward Turn-On Threshold
Voltage Change Over Supply
Voltage
DV
ON_FRWD
V
DD
= 1.5V to 5.5V -3 +0.2 +3
mV
Reverse Turn-Off Threshold
VOFF_REV
Voltage between V
DD
and V
OUT
20
mV
Forward Voltage
(V
DD
– V
OUT
) (WLP Only)
V
FWD
I
FORWARD
= 100mA 21 52
mV
I
FORWARD
=
200mA
V
DD
= 1.5V 45 89
V
DD
= 3.3V
24 57
I
FORWARD
= 500mA 43 89
I
FORWARD
= 1A 85 175
Forward Voltage (V
DD
– V
OUT
)
(SOT Only)
V
FWD
I
FORWARD
= 100mA 32 65
mV
I
FORWARD
=
200mA
V
DD
= 1.5V 63 110
V
DD
= 3.3V 46 90
I
FORWARD
= 500mA 97 175
I
FORWARD
= 1A (Note 3) 197 350
MAX40200 Ultra-Tiny Micropower, 1A Ideal Diode
with Ultra-Low Voltage Drop
www.maximintegrated.com
Maxim Integrated
│
2
Note 1: Package thermal resistances were obtained using the method described in JEDEC specification JESD51-7, using a four-layer
board. For detailed information on package thermal considerations, refer to www.maximintegrated.com/thermal-tutorial.
Absolute Maximum Ratings
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these
or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect
device reliability.
Electrical Characteristics