IRAM136-0461G
Series
4A, 600V
www.irf.com 1
Plug N Drive
TM
Integrated Power
Module for Energy Efficient Motor Drives
Description
International Rectifier’s IRAM136-0461G is an Integrated Power Module developed and optimized for elec-
tronic motor control in energy saving applications. Targeting the sub 300W three-phase motor drive
applications, such as fan or refrigerator compressor drives, this module offers the highest level of integra-
tion available in the market today. It features an input diode rectification bridge and a three-phase inverter,
complete with bootstrap diodes, high voltage gate driver IC, current shunt resistor and temperature
sensor. This high performance AC motor-driver is housed in a compact single-in-line isolated package for a
very simple design.
The internal shunt offers easy current feedback for precise control and safe operation. A built-in tem-
perature monitor and logic level shut-down function, along with the short-circuit rated IGBTs and
integrated under-voltage lockout function, deliver high level of protection and fail-safe operation.
PD-97271 RevA
Features
• Internal Rectifier Diode Bridge
• Internal Shunt Resistor
• Integrated Gate Drivers and Bootstrap Diodes
• Temperature Monitor
• Undervoltage lockout for all channels
• Matched propagation delay for all channels
• Schmitt-triggered input logic
• Cross-conduction prevention logic
• Lower di/dt gate driver for better noise immunity
• Motor Power range 0.1~0.3kW / up to 253V, 50/60Hz
• Isolation 2000V
RMS
/1min
Absolute Maximum Ratings
Parameter Description Max. Value Units
V
RRM
Input Bridge Blocking Voltage 600
V
CES
IGBT Blocking Voltage 600
V
+
Positive Bus Input Voltage 450
I
O
@ T
C
=25°C RMS Phase Current (F
PWM
=20kHz)
3.6
I
O
@ T
C
=100°C RMS Phase Current (F
PWM
=20kHz)
2
I
O PK
Pulsed RMS Phase Current (t
p
<100ms, F
PWM
=20kHz)
5
F
PWM
PWM Carrier Frequency 20 kHz
P
d
Power dissipation per IGBT @ T
C
=25°C
16 W
V
ISO
Isolation Voltage (1min) 2000
V
RMS
T
J
(IGBT & Diodes)
Operating Junction temperature Range -40 to +150
T
J
(Driver IC)
Operating Junction temperature Range -40 to +150
T Mounting torque (M3 screw) 1.0 Nm
V
°C
1
23
