IRAM136-0461G
6 www.irf.com
Symbol Definition Min Max Units
AC AC input voltage --- 253 V
AC AC input frequency 50 60 Hz
V
B1,2,3
High side floating supply voltage
V
S
+12 V
S
+20
V
S1,2,3
High side floating supply offset voltage Note 3 450
V
CC
Low side and logic fixed supply voltage 12 20
V
ITRIP
I
TRIP
input voltage V
SS
V
SS
+5
V
IN
Logic input voltage LIN, HIN
V
SS
V
SS
+5
V
Note 2: For more details, see IR21365 data sheet
Recommended Operating Conditions
The Input/Output logic timing diagram is shown in Figure 1. For proper operation the device should be used within
the recommended conditions. All voltages are absolute referenced to COM/V
SS
. The offset is tested with all supplies
biased at 15V differential (Note 2)
Note 3: Logic operational for V
S
from GND -5V to GND +600V. Logic state held for V
S
from GND -5V to GND -V
BS
.
(please refer to DT97-3 for more details)
V
V
Symbol Definition Min Typ Max Units
V
IH
Logic "0" input voltage 3.0 --- --- V
V
IL
Logic "1" input voltage --- --- 0.8 V
V
IN,Clamp
Input Clamp Voltage (HIN, LIN, T/I
TRIP
) I
IN
=10µA
4.9 5.2 5.5 V
I
QBS
Quiescent V
BS
supply current V
IN
=0V
--- --- 165 µA
I
QCC
Quiescent V
CC
supply current V
IN
=0V
--- --- 3.35 mA
I
LK
Offset Supply Leakage Current --- --- 60 µA
I
IN+
, I
EN+
Input bias current V
IN
=5V
--- 200 300 µA
I
IN-
, I
EN-
Input bias current V
IN
=0V
--- 100 220 µA
I
TRIP+
I
TRIP
bias current V
ITRIP
=5V
--- 30 100 µA
I
TRIP-
I
TRIP
bias current V
ITRIP
=0V
--- 0 1 µA
11.6 V
11.4 V
V
CCUV+
V
BSUV+
V
CC
and V
BS
supply undervoltage
Positive going threshold
V
CCUV-
V
BSUV-
V
CC
and V
BS
supply undervoltage
Negative going threshold
10.4 10.9
10.6 11.1
--- V
V
CCUVH
V
BSUVH
V
CC
and V
BS
supply undervoltage
lock-out hysteresis
--- 0.2
Static Electrical Characteristics Driver Function
V
BIAS
(V
CC
, V
BS1,2,3
)=15V, unless otherwise specified. The VIN and IIN parameters are referenced to V
SS
/COM and are
applicable to all six channels. (Note 2)