NOT RECOMMENDED FOR NEW DESIGNS DS1220Y
6. If the
low transition occurs simultaneously with or later than the
low transition in write
cycle 1, the output buffers remain in a high impedance state during this period.
7. If the
high transition occurs prior to or simultaneously with the
high transition, the output
buffers remain in a high impedance state during this period.
8. If
is low or the
low transition occurs prior to or simultaneously with the
low transition,
the output buffers remain in a high impedance state during this period.
9. Each DS1220Y is marked with a 4-digit date code AABB. AA designates the year of manufacture.
BB designates the week of manufacture. The expected t
DR
is defined as starting at the date of
manufacture.
10. All AC and DC electrical characteristics are valid over the full operating temperature range. For
commercial products, this range is 0°C to 70°C. For industrial products (IND), this range is -40°C to
+85°C.
11. In a power-down condition the voltage on any pin may not exceed the voltage of V
CC
.
12. t
WR1
, t
DH1
are measured from
going high.
13. t
WR2
, t
DH2
are measured from
going high.
14. DS1220Y modules are recognized by Underwriters Laboratories (UL) under file E99151 (R).
DC TEST CONDITIONS
Outputs open.
All voltages are referenced to ground.
AC TEST CONDITIONS
Output Load: 100pF + 1TTL Gate
Input Pulse Levels: 0-3.0V
Timing Measurement Reference Levels
Input:1.5V
Output: 1.5V
Input Pulse Rise and Fall Times: 5ns
ORDERING INFORMATION
PART TEMP RANGE
PIN-PACKAGE
5V ± 10%
5V ± 10%
+Denotes a lead(Pb)-free/RoHS-compliant package.