PSR-...-24UC/URM4/5X1/2X2/B
100517_en_03 PHOENIX CONTACT 7 / 14
6 Function description
6.1 Contact extension
The device provides additional output contacts for safe
shutdown for a suitable basic device.
6.2 Single-channel or two-channel wiring
The external enable signal of the basic device is connected
to A1.
The external enable signal of the basic device can also be
optionally connected to A2.
6.3 Automatic start
The device starts automatically once it has received the
external enable signal of the basic device.
6.4 Safe shutdown
Once the external enable signal of the basic device has
been deactivated, the enabling current paths open without
delay.
When the enabling current paths are open, the device is in
the safe state.
The confirmation current path and signaling current path
close.
7 Function and time diagrams
7.1 Time diagram for automatic start
Figure 1 Time diagram for automatic start
Key:
A1/A2 Control
23/24...63/64 Undelayed enabling current paths
11/12, 71/72 (Confirmation) signaling current
paths
A1/A2
23/24; 33/34; 43/44;
53/54; 63/64
11/12; 71/72