PTAC240502FCV1XWSA1

PTAC240502FC
Data Sheet 7 of 8 Rev. 02.2, 2014-05-14
Package Outline Specifi cations
Package H-37248-4
Find the latest and most complete information about products and packaging at the Infi neon Internet page
http://www.infi neon.com/rfpower
Diagram Notes—unless otherwise specified:
1. Interpret dimensions and tolerances per ASME Y14.5M-1994.
2. Primary dimensions are mm. Alternate dimensions are inches.
3. All tolerances ± 0.127 [.005] unless specified otherwise.
4. Pins: D1, D2 – drains; G1, G2 – gates; S – source.
5. Lead thickness: 0.10 + 0.076/–0.025 mm [0.004+0.003/–0.001 inch].
6. Gold plating thickness: 1.14 ± 0.38 micron [45 ± 15 microinch].
&
/
/
&
&
/
;
>@

>@
;
>@
/,'
>@
)/$1*(
>@
;
>@

>@
63+
>@
;5


>
5


@
' '
* *

>@

>@
6
;;
>;@

>@

>@

>@
+BSRBB
>@
$
Data Sheet 8 of 8 Rev. 02.2, 2014-05-14
Edition 2014-05-14
Published by
Infi neon Technologies AG
85579 Neubiberg, Germany
© 2014 Infi neon Technologies AG
All Rights Reserved.
Legal Disclaimer
The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics.
With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the
application of the device, Infi neon Technologies hereby disclaims any and all warranties and liabilities of any kind,
including without limitation, warranties of non-infringement of intellectual property rights of any third party.
Information
For further information on technology, delivery terms and conditions and prices, please contact the nearest
Infi neon Technologies Offi ce (
www.infi neon.com/rfpower).
Warnings
Due to technical requirements, components may contain dangerous substances. For information on the types in question,
please contact the nearest Infi neon Technologies Offi ce.
Infi neon Technologies components may be used in life-support devices or systems only with the express written approval of In-
neon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device
or system or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be
implanted in the human body or to support and/or maintain and sustain and/or protect human life. If they fail, it is
reasonable to assume that the health of the user or other persons may be endangered.
We Listen to Your Comments
Any information within this document that you feel is wrong, unclear or missing at all?
Your feedback will help us to continuously improve the quality of this document.
Please send your proposal (including a reference to this document) to:
highpowerRF@infi neon.com
To request other information, contact us at:
+1 877 465 3667 (1-877-GO-LDMOS) USA
or +1 408 776 0600 International
PTAC240502FC V1
Revision History
Revision Date Data Sheet Type Page Subjects (major changes since last revision)
01 2013-07-16 Advance All Data Sheet refl ects advance specifi cation for product development
02 2013-11-13 Production All Data Sheet refl ects released product specifi cation
02.1 2013-11-27 Production 1 Revised ESD classifi cation
02.2 2014-05-14 Production 2 Revised juntion temperature in Maximum Ratings table

PTAC240502FCV1XWSA1

Mfr. #:
Manufacturer:
Infineon Technologies
Description:
RF MOSFET Transistors RFP-LD10M
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet