Spec No. JENF243J-9103A-01 P.3/10
MURATA MFG.CO., LTD
Reference
Only
7. AEC-Q200 Requirement
7.1 Performance (based on Table 5 for Magnetics(Inductors / Transformer)
AEC-Q200 Rev.D issued June. 1 2010
AEC-Q200
Murata Specification / Deviation
No Stress Test Method
3 High
Temperature
Exposure
1000hours at 105 °C
Set for 24hours at room
temperature, then measured.
Meet Table A after testing.
Table A
4 Temperature
Cycling
1000cycles
-40
°C to + 105 °C
Set for 24hours at room
temperature,then
measured.
Meet Table A after testing.
7 Biased Humidity 1000hours at 85 °C, 85%RH
unpowered.
Meet Table A after testing.
8 Operational Life
pply 85 °C 1000 hours
Set for 24hours at room
temperature, then measured
Meet Table A after testing.
9 External Visual
isual inspection No abnormalities
10 Physical
Dimension
Meet ITEM 5
(Style and Dimensions)
No defects
12 Resistance
o Solvents
Per
MIL-STD-202
Method 215
Not Applicable
13 Mechanical Shock Per MIL-STD-202
Method 213
Condition C:
100g’s/6ms/Half sine
Meet Table A after testing.
14
ibration 5g's for 20 minutes,
12cycles eah of 3 orientations
est from 10-2000Hz.
12cycles each of 3
orientations
Meet Table A after testing.
15 Resistance
o Soldering Hea
No-heating
Solder temperature
260C+/-5 °C
Immersion time 10s
Pre-heating: 150 to 180C /90±30s
Meet Table A after testing.
17 ESD
Per AEC-Q200-002 ESD Rank: Refer to Item 3. Rating.
No defects
18 Solderbility Per J-STD-002 Method b : Not Applicable
90% of the terminations is to be soldered.
(Except exposed wire)
Appearance No damage
Impedance
(at 1MHz)
Within ±10%
DC Resistance Within ±10%