TCP−5018UB
www.onsemi.com
3
TYPICAL SPECIFICATIONS
Representative Performance Data at 255C
Table 2. PERFORMANCE DATA
Parameter Min Typ Max Units
Operating Bias Voltage 1.0 24 V
Capacitance (V
bias
= 2 V) 1.638 1.80 1.962 pF
Capacitance (V
bias
= 24 V) 0.352 0.387 0.422 pF
Tuning Range (1 V − 24 V) 4.80 5.25 6.00
Tuning Range (2 V − 24 V) 4.20 4.65 5.30
Leakage Current (V
bias
= 24 V) 0.1
mA
Operating Frequency 700 2700 MHz
Quality Factor @ 700 MHz, 2 V (Note 5) 65
Quality Factor @ 700 MHz 24 V (Note 5) 85
Quality Factor @ 2.4 GHz, 2 V (Note 5) 40
Quality Factor @ 2.4 GHz, 24 V (Note 5) 35
IP3 (V
bias
= 2 V) (Notes 1, 3 and 5) 70 dBm
IP3 (V
bias
= 24 V) (Notes 1, 3 and 5) 80 dBm
2nd Harmonic (V
bias
= 2 V) (Notes 2, 3 and 5) −65 dBm
2nd Harmonic (V
bias
= 24 V) (Notes 2, 3 and 5) −75 dBm
3rd Harmonic (V
bias
= 2 V) (Notes 2, 3 and 5) −45 dBm
3rd Harmonic (V
bias
= 24 V) (Notes 2, 3 and 5) −75 dBm
Transition Time (Cmin ³ Cmax) (Notes 4 and 5) 66
ms
Transition Time (Cmax ³ Cmin) (Notes 4 and 5) 48
ms
1. f
1
= 850 MHz, f
2
= 860 MHz, Pin 25 dBm/Tone
2. 850 MHz, Pin +34 dBm
3. IP3 and Harmonics are measured in the shunt configuration in a 50 W environment
4. RF
IN
and RF
OUT
are both connected to DC ground
5. Sample Testing Only. Average Transition Time for all start and stop voltage combinations between 2 V and 24 V is 50 ms.