© 2011 Microchip Technology Inc. DS22268A-page 1
MCP9501/2/3/4
Features
Factory Set Temperature Switch
Available Temperature Switch Thresholds:
-T
SET
= -35°C,-25°C, -15°C, -5°C, 5°C, 15°C,
25°C, 35°C, 45°C, 55°C, 65°C, 75°C, 85°C,
95°C, 105°C, 115°C, 125°C
Wide Operating Voltage Range: 2.7V to 5.5V
Low Supply Current: 25 µA (typical)
Temperature Switch Accuracy:
- ±1°C (typical)
- ±4°C (maximum) -15°C to +75°C
- ±6°C (maximum) -40°C to +125°C
Switch Threshold Options (Hot/Cold):
- Rising Temp.: MCP9501/2 (Hot Option)
- Falling Temp.: MCP9503/4 (Cold Option)
Output Configuration Options:
- Active Low, Open-Drain Output: MCP9501/3
– Uses External Pull-up Resistor
- Active-High, Push-Pull Output: MCP9502/4
User Selectable Hysteresis: 2°C or 10°C (typical)
5-lead SOT-23 package
Applications
Power Supply Critical Temperature Shutdown
Temperature Alarm
Thermostat Control
•Fan Control
Base-Stations
Automotive
Typical Performance
Description
Microchip Technology’s MCP9501/2/3/4 family of
devices are temperature switches with ±1°C (typical)
accurate factory set output thresholds. These devices
are ideal for high power supply systems where an
overtemperature protection circuit is needed. These
devices do not require external components, consume
25 µA (typical), and the factory set thresholds provide
simplicity.
In addition, this family of devices provide user
selectable 2°C and 10°C (typical) switch hysteresis,
and various output configurations. The MCP9501/2
outputs switch for rising temperatures while the
MCP9503/4 switch for falling temperature, with the
relative hysteresis at the set thresholds. This family of
devices is also available with Active-High Push-Pull
and Active-Low Open-Drain outputs, the MCP9502/4
and the MCP9501/3, respectively. The Push-Pull
output is ideal for a microcontroller interface while the
Open-Drain output can be used for level shifting, wired-
OR configuration, or as a heater on/off switch.
The MCP9501/2/3/4 operate from 2.7V to 5.5V supply.
This family is available with space saving 5-lead
SOT-23 package.
Package Types
0%
10%
20%
30%
40%
50%
-4.0
-2.0
0.0
2.0
4.0
Temperature Accuracy (°C)
Occurrences
T
A
= -35°C to 125°C
V
DD
= 4.1V
32 Units
4
1
2
3
5
GND
Hyst
SOT-23-5
MCP9501/2/3/4
GND
Output
V
DD
Temperature Switch with Selectable Hysteresis
MCP9501/2/3/4
DS22268A-page 2 © 2011 Microchip Technology Inc.
OUTPUT FUNCTIONAL DESCRIPTION
Temperature
COLD
HOT
V
Output
Hysteresis
T
HYST
T
SET
MCP9501, Hot-Option (Open-Drain, Active-Low)
Temperature
V
Output
COLD HOT
Hysteresis
T
HYST
T
SET
MCP9502, Hot-Option (Push-Pull, Active-High)
Temperature
V
Output
COLD HOT
T
SET
T
HYST
Hysteresis
MCP9503, Cold-Option (Open-Drain, Active-Low)
COLD
HOT
V
Output
Hysteresis
T
SET
T
HYST
MCP9504, Cold-Option (Push-Pull, Active-High)
Temperature
Note: Available temperature thresholds for
Option P or for rising temperature
only: +5°C, +15°C, +25°C, +35°C,
+45°C, +55°C, +65°C, +75°C, +85°C,
+95°C, +105°C, +115°C, +125°.
Note: Available temperature thresholds for
Option P or for rising temperature
only: +5°C, +15°C, +25°C, +35°C,
+45°C, +55°C, +65°C, +75°C, +85°C,
+95°C, +105°C, +115°C, +125°.
Note: Available temperature thresholds for
Option P or for rising temperature
only: +5°C, +15°C, +25°C.
Note: Available temperature thresholds for
Option N or for falling temperature
only: -35°C, -25°C, -15°C, -5°C.
Note: Available temperature thresholds for
Option P or for rising temperature only:
+5°C, +15°C, +25°C.
Note: Available temperature thresholds for
Option N or for falling temperature only:
-35°C, -25°C, -15°C, -5°C.
Note: Contact Microchip for all other
threshold options.
© 2011 Microchip Technology Inc. DS22268A-page 3
MCP9501/2/3/4
1.0 ELECTRICAL
CHARACTERISTICS
Absolute Maximum Ratings †
V
DD
.................................................................................. 6.0V
Voltage at all Input/Output pins............... GND – 0.3V to 6.0V
Input/Output Current .....................................................20 mA
Storage temperature .....................................-65°C to +150°C
Ambient temp. with power applied................-40°C to +125°C
Junction Temperature (T
J
).......................................... +150°C
ESD protection on all pins (HBM:MM)................. (4 kV/400V)
Latch-Up Current at each pin (25°C) ....................... ±200 mA
†Notice: Stresses above those listed under “Maximum
ratings” may cause permanent damage to the device. This is
a stress rating only and functional operation of the device at
those or any other conditions above those indicated in the
operational listings of this specification is not implied.
Exposure to maximum rating conditions for extended periods
may affect device reliability.
DC CHARACTERISTICS
Electrical Specifications: Unless otherwise indicated, V
DD
= 2.7V to 5.5V, T
A
= -40°C to +125°C, and
GND = Ground.
Parameters Sym Min Typ Max Unit Conditions
Sensor Accuracy
-15°C T
A
+75°C -4 ±1 +4 °C Note 1
-40°C T
A
+125°C -6 ±2 6 °C
Power Supply
Operating Voltage V
DD
2.7 5.5 V
Operating Current I
DD
—2540µA
Line-Regulation Δ°C/ΔV— 0.2 °C/VV
DD
= 2.7V to 5.5V
Hysteresis
Trip Point Hysteresis T
HYST
—2°CHYST = GND
—10°CHYST = V
DD
Hysteresis Select Input V
IH
0.8V
DD
——V
V
IL
——0.2V
DD
V
I
Leak
—0.1µA
Open-Drain Output Leakage I
Leak
0.1 10 µA MCP9501/3
Output Voltage High V
OH
0.8V
DD
——VI
OUT
= 5 mA (MCP9502/4)
Output Voltage Low V
OL
——0.2V
DD
VI
OUT
= 5 mA
Turn On Time T
ON
—1ms
SOT23-5 t
RES
1.7 s Time to 63% (89°C).
+25°C (Air) to +125°C
(oil bath)
Note 1: This specification is tested at mid supply of 4.1V for optimum operation across the supply voltage range of
2.7V to 5.5V.
TEMPERATURE CHARACTERISTICS
Electrical Specifications: Unless otherwise indicated, V
DD
= 2.7V to 5.5V, T
A
= -40°C to +125°C, and
GND = Ground.
Parameters Sym Min Typ Max Units Conditions
Temperature Ranges
Specified Temperature Range T
A
-40 +125 °C (Note 1)
Operating Temperature Range T
A
-40 +125 °C
Storage Temperature Range T
A
-65 +150 °C
Thermal Package Resistances
Thermal Resistance, 5L-SOT23 θ
JA
220.7 °C/Ω
Note 1: Operation in this range must not cause T
J
to exceed Maximum Junction Temperature (+150°C).

MCP9502PT-065E/OT

Mfr. #:
Manufacturer:
Description:
Board Mount Temperature Sensors Factory Prog Temp SW Act Hi puch-pull out
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union