EVAL-ADM2914EBZ Datasheet EVAL-ADM2914EBZ | P10-P12

UG-174 Evaluation Board User Guide

Rev. 0 | Page 10 of 12

ORDERING INFORMATION

BILL OF MATERIALS

Table 5.

Name Part Description Part Number Stock Code

−3V3, −5V, LATCH/DIS, OV, UV, 1V, 2V5, 3V3, 5V,

6V2, REF, REG4FB, REG4FB1, REG4IN, REG4IN2,

SEL, TMR, VCC, VH1 to VH4, VL1 to VL4

Red test point 20-313137 FEC 873 1144

C1 Capacitor, 0.33 μF, 1206, 10%, 25 V C1206C334K3RACTU FEC 1650900

C2, C3

50 V electrolytic capacitor, Case B,

low ESR, 1 μF, 20%

EEEFC1H1R0R FEC 9694528

C4, C5

16 V electrolytic capacitor, Case B,

10 μF, 20%

EEEFK1C100R FEC 9695648

0805, capacitor footprint

(not inserted), user defined

Not inserted Not inserted

C8 to C10, C12 Capacitor, 0805, 2.2 μF, 10 V, X7R, ±10% CC0805KKX7R6BB225 FEC 9402152

C11, C13, C19, C22 Capacitor, 0603, 1μF, 10 V CC0603ZRY5V6BB105 FEC 3188840

C14 Capacitor, 0805, 10 pF, 100 V, 5% MCCA000390 FEC 9406239

C15 Capacitor, 0805, 1 nF, 50 V, 5% 08055A102JAT2A FEC 317457

C16

Through-hole capacitor

(not inserted), user defined

Not inserted Insert low profile sockets

C34 Capacitor, 0805, 0.01 μF, 10% CC0805KRX7R8BB103 FEC 3019767

D1 to D4, D6 to D8 Green, 0805, chip LED KP-2012SGC FEC 1318243

GND Red test point 20-313137 FEC 8731144

J1 2-pin terminal block (5 mm pitch) FEC 151-785

J2, J4 to J6, J9, J10

2-pin (0.1" pitch) header and

shorting shunt, jumper socket red

M20-9990246 and

M7566-05

FEC 1022247 and

FEC 150411

J3 2.1 mm, dc barrel power connector DC10A FEC 224959

Q1 to Q6

General-purpose NPN SMD transistor,

BC850C, SOT-23

BC850C FEC 1081241

R1, R44, R45 51 kΩ resistor, 0805, ±1% MC 0.1W 0805 1% 51K FEC 9333339

R2 220 kΩ resistor, 0805, ±1% MC 0.1W 0805 1% 220K FEC 9332839

R3 to R5, R1,1 R29, R34 100 kΩ resistor, 0805, ±5% RC0805JR-07100KL FEC 9234250

R6 604 kΩ resistor, 0805, ±0.1% MCTC0525B6043T5E FEC 1576103

R7, R12, R14, R28, R30, R33, R35, R40 to R43 1 kΩ resistor, 0.1 W, 0805, ±1% WCR0805-1K0FI FEC 1099800

R8 51.1 kΩ resistor, 0603, ±0.1% PCF0603R 51K1BI.T1 FEC 1160386

R9 49.9 kΩ resistor, 0805, ±1% CRCW080549K9FKEA FEC 1469934

R10 120 kΩ resistor, 0805, ±1% MC 0.1W 0805 1% 120K FEC 9332510

R13 3.6 kΩ resistor, 0805, ±1% MC 0.1W 0805 1% 3K6 FEC 9333118

R15 9.31 kΩ resistor, 0805, ±0.1% MCTC0525B9311T5E FEC 1575897

R16 357 kΩ resistor, 0805, ±0.1% PCF0805R-357KBT1 FEC 1353265

R17 634 kΩ resistor, 0805, ±0.1% PCF0805R 634KBI.T1 FEC 1160299

R18, R23 14.3 kΩ resistor, 0603, ±0.1% PCF0603R-14K3BT1 FEC 1353120

R19 7.32 kΩ resistor, 0805, ±0.1% PCF0805R 7K32BI.T1 FEC 1160193

R20 44.2 kΩ resistor, 0805, ±0.1% PCF0805R-44K2BT1 FEC 1353276

R21, R24 64.9 kΩ resistor, 0603, ±0.1% PCF0603R-64K9BT1 FEC 1353180

R22 392 kΩ resistor, 0805, ±0.1% PCF0805R 392KBI.T1 FEC 1160287

R25 162 kΩ resistor, 0603, ±0.1% PCF0603R-162KBT1 FEC 1353121

R26 8.2 kΩ resistor, 0805, ±1% MC 0.1W 0805 1% 8K2 FEC 9333584

R27 4.12 kΩ resistor, 0805, ±0.1% PCF0805R-4K12BT1 FEC 1353280

R31 11.8 kΩ resistor, 125 mW, ±1% CRCW080511K8FKEA FEC 1258438

R32 29.4 kΩ resistor, 125 mW, ±1% CRCW080529K4FKEA FEC 1152323

R36, R39 39.2 kΩ resistor, 0603, ±0.1% PCF0603R-39K2BT1 FEC 1353166

Evaluation Board User Guide UG-174

Rev. 0 | Page 11 of 12

Name Part Description Part Number Stock Code

R37 39 kΩ resistor, 0603, ±0.1% ERA3AEB393V FEC 1577627

R38 4.32 kΩ resistor, 0603, ±0.1% PCF0603R 4K32BI.T1 FEC 1160343

R_SHUNT Resistor, 1206 Not populated Not applicable

S1 Slide switch, SP 3 POS, VERT STSSS9131 FEC 1123876

S2, S4 Slide switch, SP 2 POS, VERT STSSS9121 FEC 1123875

S3 4-way SMD switch (SW\4DIP) A6S-4101 FEC 9901868

S5 Switch slide 4P3T, 30 V, right angle EG4319 Digi-Key EG1915-ND

ADM8828, switched-capacitor voltage

inverter with shutdown, SOT-23-6

ADM8828ARTZ ADM8828ARTZ

U2, U3

ADP3334 adjustable LDO regulator,

MSOP-8

ADP3334ARMZ ADP3334ARMZ

ADM8660, CMOS switched-capacitor

voltage converter SOIC-8

ADM8660ARZ ADM8660ARZ

U5 6.2 V voltage regulator, 78L62, TO-92-3 LM78L62ACZ FEC 9490213

U6, U7 ADP1712 adjustable LDO, TSOT-5 ADP1712AUJZ-R7 ADP1712AUJZ-R7

U8 ADM2914, 16-lead QSOP OTS-16(28)-0.635-02 Abrel OTS-16(28)-0.635-02

4-channel supervisory circuit

footprint, QSOP-16

Not populated Not applicable

VR1, VR2, VR4 50 kΩ trimmer M63M503KB30T607 FEC 9608257

VR3 5 kΩ trimmer M63M502KB30T607 FEC 9608222

X1 to X16

Patchwork area, keep holes

free of solder

Not applicable Not applicable

UG-174 Evaluation Board User Guide

Rev. 0 | Page 12 of 12

NOTES

ESD Caution

ESD (electrostatic discharge) sensitive device. Charged devices and circuit boards can discharge without detection. Although this product features patented or proprietary protection

circuitry, damage may occur on devices subjected to high energy ESD. Therefore, proper ESD precautions should be taken to avoid performance degradation or loss of functionality.

Legal Terms and Conditions

By using the evaluation board discussed herein (together with any tools, components documentation or support materials, the “Evaluation Board”), you are agreeing to be bound by the terms and conditions

set forth below (“Agreement”) unless you have purchased the Evaluation Board, in which case the Analog Devices Standard Terms and Conditions of Sale shall govern. Do not use the Evaluation Board until you

have read and agreed to the Agreement. Your use of the Evaluation Board shall signify your acceptance of the Agreement. This Agreement is made by and between you (“Customer”) and Analog Devices, Inc.

(“ADI”), with its principal place of business at One Technology Way, Norwood, MA 02062, USA. Subject to the terms and conditions of the Agreement, ADI hereby grants to Customer a free, limited, personal,

temporary, non-exclusive, non-sublicensable, non-transferable license to use the Evaluation Board FOR EVALUATION PURPOSES ONLY. Customer understands and agrees that the Evaluation Board is provided

for the sole and exclusive purpose referenced above, and agrees not to use the Evaluation Board for any other purpose. Furthermore, the license granted is expressly made subject to the following additional

limitations: Customer shall not (i) rent, lease, display, sell, transfer, assign, sublicense, or distribute the Evaluation Board; and (ii) permit any Third Party to access the Evaluation Board. As used herein, the term

“Third Party” includes any entity other than ADI, Customer, their employees, affiliates and in-house consultants. The Evaluation Board is NOT sold to Customer; all rights not expressly granted herein, including

ownership of the Evaluation Board, are reserved by ADI. CONFIDENTIALITY. This Agreement and the Evaluation Board shall all be considered the confidential and proprietary information of ADI. Customer may

not disclose or transfer any portion of the Evaluation Board to any other party for any reason. Upon discontinuation of use of the Evaluation Board or termination of this Agreement, Customer agrees to

promptly return the Evaluation Board to ADI. ADDITIONAL RESTRICTIONS. Customer may not disassemble, decompile or reverse engineer chips on the Evaluation Board. Customer shall inform ADI of any

occurred damages or any modifications or alterations it makes to the Evaluation Board, including but not limited to soldering or any other activity that affects the material content of the Evaluation Board.

Modifications to the Evaluation Board must comply with applicable law, including but not limited to the RoHS Directive. TERMINATION. ADI may terminate this Agreement at any time upon giving written notice

to Customer. Customer agrees to return to ADI the Evaluation Board at that time. LIMITATION OF LIABILITY. THE EVALUATION BOARD PROVIDED HEREUNDER IS PROVIDED “AS IS” AND ADI MAKES NO

WARRANTIES OR REPRESENTATIONS OF ANY KIND WITH RESPECT TO IT. ADI SPECIFICALLY DISCLAIMS ANY REPRESENTATIONS, ENDORSEMENTS, GUARANTEES, OR WARRANTIES, EXPRESS OR IMPLIED, RELATED

TO THE EVALUATION BOARD INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, TITLE, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT OF INTELLECTUAL

PROPERTY RIGHTS. IN NO EVENT WILL ADI AND ITS LICENSORS BE LIABLE FOR ANY INCIDENTAL, SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES RESULTING FROM CUSTOMER’S POSSESSION OR USE OF

THE EVALUATION BOARD, INCLUDING BUT NOT LIMITED TO LOST PROFITS, DELAY COSTS, LABOR COSTS OR LOSS OF GOODWILL. ADI’S TOTAL LIABILITY FROM ANY AND ALL CAUSES SHALL BE LIMITED TO THE

AMOUNT OF ONE HUNDRED US DOLLARS ($100.00). EXPORT. Customer agrees that it will not directly or indirectly export the Evaluation Board to another country, and that it will comply with all applicable

United States federal laws and regulations relating to exports. GOVERNING LAW. This Agreement shall be governed by and construed in accordance with the substantive laws of the Commonwealth of

Massachusetts (excluding conflict of law rules). Any legal action regarding this Agreement will be heard in the state or federal courts having jurisdiction in Suffolk County, Massachusetts, and Customer hereby

submits to the personal jurisdiction and venue of such courts. The United Nations Convention on Contracts for the International Sale of Goods shall not apply to this Agreement and is expressly disclaimed.

registered trademarks are the property of their respective owners.

UG09186-0-6/10(0)

P1-P3 P4-P6 P7-P9 P10-P12

EVAL-ADM2914EBZ

Mfr. #:

Buy EVAL-ADM2914EBZ

Manufacturer:

Analog Devices Inc.

Description:

ADM2914/ADM12914 Processor Supervisory Evaluation Board

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet

EVAL-ADM2914EBZ