OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

MAX5355EUA+T

P1-P3P4-P6P7-P9P10-P12P13-P15P16-P16
__________________General Description
The MAX5354/MAX5355 combine a low-power, voltage-
output, 10-bit digital-to-analog converter (DAC) and a
precision output amplifier in an 8-pin µMAX or DIP pack-
age. The MAX5354 operates from a single +5V supply,
and the MAX5355 operates from a single +3.3V supply.
Both devices draw less than 280µA of supply current.
The output amplifier’s inverting input is available to the
user, allowing specific gain configurations, remote
sensing, and high output current capability. This makes
the MAX5354/MAX5355 ideal for a wide range of appli-
cations, including industrial process control. Other fea-
tures include a software shutdown and power-on reset.
The serial interface is compatible with SPI™/QSPI™
and Microwire™. The DAC has a double-buffered input,
organized as an input register followed by a DAC regis-
ter. A 16-bit serial word loads data into the input regis-
ter. The DAC register can be updated independently or
simultaneously with the input register. All logic inputs
are TTL/CMOS-logic compatible and buffered with
Schmitt triggers to allow direct interfacing to opto-
couplers.
________________________Applications
Digital Offset and Gain Adjustment
Industrial Process Controls
Microprocessor-Controlled Systems
Portable Test Instruments
Remote Industrial Controls
______________________________Features
♦ 10-Bit DAC with Configurable Output Amplifier
♦ +5V Single-Supply Operation (MAX5354)
+3.3V Single-Supply Operation (MAX5355)
♦ Low Supply Current: 0.28mA Normal Operation
2µA Shutdown Mode
♦ Available in 8-Pin µMAX
♦ Power-On Reset Clears DAC Output to Zero
♦ SPI/QSPI and Microwire Compatible
♦ Schmitt-Trigger Digital Inputs for Direct
Optocoupler Interface
♦ +3.3V MAX5355 Directly Interfaces with +5V Logic
MAX5354/MAX5355
10-Bit Voltage-Output DACs
in 8-Pin µMAX
________________________________________________________________
Maxim Integrated Products
1
MAX5354
MAX5355
OUT
FB
CS
DIN
SCLK
DAC
REF
DAC
REGISTER
INPUT
REGISTER
CONTROL
V
DD
GND
16-BIT
SHIFT
REGISTER
____________________Functional Diagram
REF
DIN
FB
SCLK
1
2
8
7
V
DD
GND
CS
OUT
MAX5354
MAX5355
DIP/µMAX
TOP VIEW
3
4
6
5
_______________________Pin Configuration
19-1167; Rev 1; 2/97
PART*
MAX5354CPA
MAX5354CUA 0°C to +70°C
0°C to +70°C
TEMP. RANGE PIN-PACKAGE
8 Plastic DIP
8 µMAX
_________________Ordering Information
For free samples & the latest literature: http://www.maxim-ic.com, or phone 1-800-998-8800
SPI and QSPI are trademarks of Motorola, Inc. Microwire is a trademark of National Semiconductor Corp.
MAX5354EPA
MAX5354EUA -40°C to +85°C
-40°C to +85°C 8 Plastic DIP
8 µMAX
MAX5354MJA -55°C to +125°C 8 CERDIP**
Ordering Information continued at end of data sheet.
*
Contact factory for availability of 8-pin SO package.
**
Contact factory for availability and processing to MIL-STD-883.
MAX5354/MAX5355
10-Bit Voltage-Output DACs
in 8-Pin µMAX
2 _______________________________________________________________________________________
ABSOLUTE MAXIMUM RATINGS
ELECTRICAL CHARACTERISTICS: MAX5354
(V
DD
= +5V ±10%, GND = 0V, REF = 2.5V, R
L
= 5kΩ, C
L
= 100pF, T
A
= T
MIN
to T
MAX
, unless otherwise noted. Typical values are at
T
A
= +25°C. Output buffer connected in unity-gain configuration (Figure 8).)
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
V
DD
to GND..............................................................-0.3V to +6V
REF, OUT, FB to GND................................-0.3V to (V
DD
+ 0.3V)
Digital Inputs to GND ...............................................-0.3V to +6V
Continuous Current into Any Pin.......................................±20mA
Continuous Power Dissipation (T
A
= +70°C)
Plastic DIP (derate 9.09mW/°C above +70°C).................727mW
µMAX (derate 4.10mW/°C above +70°C) ......................330mW
CERDIP (derate 8.00mW/°C above +70°C)...................640mW
Operating Temperature Ranges
MAX5354C_A/MAX5355C_A ................................0°C to +70°C
MAX5354E_A/MAX5355E_A..............................-40°C to +85°C
MAX5354MJA/MAX5355MJA ..........................-55°C to +125°C
Storage Temperature Range.............................-65°C to +150°C
Lead Temperature (soldering, 10sec).............................+300°C
Code dependent, minimum at code 1550 hex
4.5V ≤ V
DD
≤ 5.5V
MAX5354C/E
CONDITIONS
kΩ18 30R
REF
Reference Input Resistance
V0 V
DD
- 1.4V
REF
Reference Input Range
µV/VPSRRPower-Supply Rejection Ratio 800
Bits10NResolution
ppm/°C1Gain-Error Tempco
LSBGEGain Error (Note 1) -0.3 ±2
ppm/°C6TCV
OS
Offset-Error Tempco
LSBINL
Integral Nonlinearity
(Note 1)
±1
±0.3 ±8 mVV
OS
Offset Error
UNITSMIN TYP MAXSYMBOLPARAMETER
Guaranteed monotonic LSB±1.0DNLDifferential Nonlinearity
V
REF
= 0.67Vp-p kHz650Reference -3dB Bandwidth
Input code = all 0s, V
REF
= 3.6Vp-p at 1kHz
V
REF
= 1Vp-p at 25kHz, code = full scale dB77SINAD
Signal-to-Noise Plus
Distortion Ratio
dB-84Reference Feedthrough
V2.4V
IH
Input High Voltage
V
IN
= 0V or V
DD
pF8C
IN
Input Capacitance
µA0.001 ±0.5I
IN
Input Leakage Current
V0.8V
IL
Input Low Voltage
STATIC PERFORMANCE—ANALOG SECTION
DIGITAL INPUTS
REFERENCE INPUT
MULTIPLYING-MODE PERFORMANCE
MAX5354M ±2
MAX5354/MAX5355
10-Bit Voltage-Output DACs
in 8-Pin µMAX
_______________________________________________________________________________________ 3
ELECTRICAL CHARACTERISTICS: MAX5354 (continued)
(V
DD
= +5V ±10%, GND = 0V, REF = 2.5V, R
L
= 5kΩ, C
L
= 100pF, T
A
= T
MIN
to T
MAX
, unless otherwise noted. Typical values are at
T
A
= +25°C. Output buffer connected in unity-gain configuration (Figure 8).)
(Note 3)
CS = V
DD
, DIN = 100kHz
Rail-to-rail (Note 2)
To ±1/2LSB, V
STEP
= 2.5V
CONDITIONS
mA0.28 0.4I
DD
Supply Current
V4.5 5.5V
DD
Supply Voltage
nV-s5Digital Feedthrough
µs20Start-Up Time
µA0.001 ±0.1Current into FB
V0 to V
DD
Output Voltage Swing
µs10Output Settling Time
V/µs0.6SRVoltage Output Slew Rate
UNITSMIN TYP MAXSYMBOLPARAMETER
(Note 3) µA4 20Supply Current in Shutdown
µA0.001 ±0.5Reference Current in Shutdown
ns40t
CH
SCLK Pulse Width High
ns100t
CP
SCLK Clock Period
ns40t
CSS
CS Fall to SCLK Rise Setup Time
ns40t
DS
DIN Setup Time
ns0t
CSH
SCLK Rise to CS Rise Hold Time
ns40t
CL
SCLK Pulse Width Low
ns40t
CS1
CS Rise to SCLK Rise Hold Time
ns100t
CSW
CS Pulse Width High
ns40t
CS0
SCLK Rise to CS Fall Delay
ns0t
DH
DIN Hold Time
Note 1: Guaranteed from code 3 to code 1023 in unity-gain configuration.
Note 2: Accuracy is better than 1LSB for V
OUT
= 8mV to V
DD
- 100mV, guaranteed by a power-supply rejection test at the
end points.
Note 3: R
L
= ∞, digital inputs at GND or V
DD
.
DIGITAL INPUTSDYNAMIC PERFORMANCE
POWER SUPPLIES
TIMING CHARACTERISTICS (Figure 6)
P1-P3P4-P6P7-P9P10-P12P13-P15P16-P16

MAX5355EUA+T

Mfr. #:
Buy MAX5355EUA+T
Manufacturer:
Maxim Integrated
Description:
Digital to Analog Converters - DAC 10-Bit Precision DAC
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet