MQ172 Series●Micro-Miniature Interface Connectors For Power Supply / Signaling
■Receptacles
B
Illustration Of Receptacle
Set Installed
●3-Position type
●4-Position type
Parts No.HRS No.RoHS
MQ172-3PA-(
✽✽
)CL206-0950-4(
✽✽
)
YES
Parts No.HRS No.RoHS
MQ172X-4PA-(
✽✽
)CL206-2000-6(
✽✽
)
YES
✽✽ (55) : tray-based packing
(66) : embossed tape packing
(1 reel = 1,000 pcs.)
✽✽ (55) : tray-based packing
(66) :
embossed tape packing
(1 reel = 1,000 pcs.)
(Note.) For MQ172, mounting to circuit boards
is SMT type.
For the purpose of more adequate fixing
against external force,it is desirable to
affix the entire set after setting as shown
in the figure above.
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
03/2009
Apr.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
5
MQ172 Series●Micro-Miniature Interface Connectors For Power Supply / Signaling
BRecommended Land Pattern Dimensions Diagram
●3-Position type
●4-Position type
Note.) Mounting of this product to circuit boards is the SMT type.
To provide more adequate fixing, use of adhesive for board-installed area is recommended.
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
03/2009
Apr.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
6
MQ172 Series●Micro-Miniature Interface Connectors For Power Supply / Signaling
(Note.) The figure above provides the case of a 3 contact type, dimensions
shown in such figure are the same as those of a 4 contact type.
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
03/2009
Apr.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
