OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

ATTINY4-TS8R

P1-P3P4-P6P7-P9P10-P12P13-P15P16-P17
1. Pin Configurations
Figure 1-1. Pinout of ATtiny4/5/9/10
1
2
3 4
6
5 VCC
GND
PB2 (T0/CLKO/PCINT2/INT0/ADC2)
PB3 (RESET/PCINT3/ADC3)
SOT-23
(PCINT0/TPIDATA /OC0A/ADC0/AIN0) PB0
(PCINT1/TPICLK/CLKI/ICP0/OC0B/ADC1/AIN1) PB1
1
2
3
4
8
7
6
5
VCC
GND
PB3 (RESET/PCINT3/ADC3)
PB0 (AIN0/ADC0/OC0A/TPIDATA /PCINT0)
Power
Clock
Digital
GND
Analog
UDFN
PB2 (T0/CLKO/PCINT2/INT0/ADC2)(PCINT1/TPICLK/CLKI/ICP0/OC0B/ADC1/AIN1) PB1
NC
NC
NC
1.1. Pin Descriptions
1.1.1. VCC
Digital supply voltage.
1.1.2. GND
Ground.
1.1.3. Port B (PB[3:0])
This is a 4-bit, bi-directional I/O port with internal pull-up resistors, individually selectable for each bit. The
output buffers have symmetrical drive characteristics, with both high sink and source capability. As inputs,
the port pins that are externally pulled low will source current if pull-up resistors are activated. Port pins
are tri-stated when a reset condition becomes active, even if the clock is not running.
1.1.4. RESET
Reset input. A low level on this pin for longer than the minimum pulse length will generate a reset, even if
the clock is not running and provided the reset pin has not been disabled. The minimum pulse length is
given in System and Reset Characteristics of Electrical Characteristics. Shorter pulses are not
guaranteed to generate a reset.
The reset pin can also be used as a (weak) I/O pin.
Atmel ATtiny4 / ATtiny5 / ATtiny9 / ATiny10 [DATASHEET]
Atmel-8127H-ATiny4/ ATiny5 /ATiny9/ ATiny10_Datasheet_Summary-11/2016
4
2. Ordering Information
2.1. ATtiny4
Supply Voltage Speed
(1)
Temperature Package
(2)
Ordering Code
(3)
1.8 – 5.5V 12MHz
Industrial
(-40°C to 85°C)
(4)
6ST1 ATTINY4-TSUR
(5)
ATTINY4-TSHR
(6)(7)
8MA4 ATTINY4-MAHR
(7)
10MHz
Extended
(-40°C to 125°C)
(8)
6ST1 ATTINY4-TSFR
(5)
ATTINY4-TS8R
(6)(7)
Note: 
1. For speed vs. supply voltage, see section Speed.
2. All packages are Pb-free, halide-free and fully green and they comply with the European directive
for Restriction of Hazardous Substances (RoHS). NiPdAu finish.
3. Tape and reel.
4. Can also be supplied in wafer form. Contact your local sales office for ordering information and
minimum quantities.
5. Marking details:
– Top mark 1st line: ddddTY
– Top mark 2nd line: wwxxx
dddd= device, special code
T= Type
Y= Year last digit
ww= calendar workweek
xxx = trace code
6. Not recommended for new designs.TPUBSTINY-216
7. Top/bottom markings:
– Top: T4x, where x = die revision
– Bottom: zHzzz or z8zzz, where H = (-40°C to 85°C), and 8 = (-40°C to 125°C)
8. For typical and Electrical characteristics for this device please consult Appendix A, ATtiny4/5/9/10
Specification at 125°C.
Table 2-1. Package Type
6ST1 6-lead, 2.90 x 1.60 mm Plastic Small Outline Package (SOT23)
8MA4 8-pad, 2 x 2 x 0.6 mm Plastic Ultra Thin Dual Flat No Lead (UDFN)
Atmel ATtiny4 / ATtiny5 / ATtiny9 / ATiny10 [DATASHEET]
Atmel-8127H-ATiny4/ ATiny5 /ATiny9/ ATiny10_Datasheet_Summary-11/2016
5
2.2. ATtiny5
Supply Voltage Speed
(1)
Temperature Package
(2)
Ordering Code
(3)
1.8 – 5.5V 12MHz
Industrial
(-40°C to 85°C)
(4)
6ST1 ATTINY5-TSUR
(5)
ATTINY5-TSHR
(6)(7)
8MA4 ATTINY5-MAHR
(7)
10MHz
Extended
(-40°C to 125°C)
(8)
6ST1 ATTINY5-TSFR
(5)
ATTINY5-TS8R
(6)(7)
Note: 
1. For speed vs. supply voltage, see section Speed.
2. All packages are Pb-free, halide-free and fully green and they comply with the European directive
for Restriction of Hazardous Substances (RoHS). NiPdAu finish.
3. Tape and reel.
4. Can also be supplied in wafer form. Contact your local sales office for ordering information and
minimum quantities.
5. Marking details:
– Top mark 1st line: ddddTY
– Top mark 2nd line: wwxxx
dddd= device, special code
T= Type
Y= Year last digit
ww= calendar workweek
xxx = trace code
6. Not recommended for new designs.TPUBSTINY-216
7. Top/bottomside markings:
– Top: T5x, where x = die revision
– Bottom: zHzzz or z8zzz, where H = (-40°C to 85°C), and 8 = (-40°C to 125°C)
8. For typical and Electrical characteristics for this device please consult Appendix A, ATtiny4/5/9/10
Specification at 125°C.
Table 2-2. Package Type
6ST1 6-lead, 2.90 x 1.60 mm Plastic Small Outline Package (SOT23)
8MA4 8-pad, 2 x 2 x 0.6 mm Plastic Ultra Thin Dual Flat No Lead (UDFN)
Atmel ATtiny4 / ATtiny5 / ATtiny9 / ATiny10 [DATASHEET]
Atmel-8127H-ATiny4/ ATiny5 /ATiny9/ ATiny10_Datasheet_Summary-11/2016
6
P1-P3P4-P6P7-P9P10-P12P13-P15P16-P17

ATTINY4-TS8R

Mfr. #:
Buy ATTINY4-TS8R
Manufacturer:
Microchip Technology / Atmel
Description:
8-bit Microcontrollers - MCU 512B FLASH 32B SRAM TIMER
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet