OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

LQM21FN220N00L

P1-P3P4-P6P7-P9
Spec No. JELF243B-0006Q-01 P.1/9
MURATA MFG.CO., LTD
Reference
Only
CHIP COIL (CHIP INDUCTORS) LQM21FN□□□□00□ REFERENCE SPECIFICATION
1. Scope
This reference specification applies to LQM21FN□□□□00□ series, Chip coil (Chip Inductors).
2. Part Numbering
(ex) LQ M 21 F N 1R0 N 0 0 D
Product ID Structure Dimension Applications Category Inductance Tolerance Features Electrode Packaging
(L×W) and
D: Taping
Characteristics (Paper tape)
L: Taping
*B: Bulk packing also available (Plastic tape)
*B: BULK
3. Rating
・Operating Temperature Range – 40°C to + 85°C
・Storage Temperature Range – 55°C to
+125°C
Customer
Part Number
MURATA
Part Number
Inductance
DC
Resistance
Self
Resonant
Frequency
Rated
Current
(μH) Tolerance (Ω) (MHz min.) (mA)
LQM21FN1R0N00D 1.0
±30%
0.20±30% 105 220
LQM21FN2R2N00D 2.2 0.28±30% 70 150
LQM21FN4R7N00L 4.7 0.30±30% 25 80
LQM21FN100N00L 10 0.50±30% 15 60
LQM21FN220N00L 22 0.35±30% 15 13
LQM21FN470N00L 47 0.60±30% 7.5 7
4.
Appearance and Dimensions
(in mm)
Dimension of T
Inductance: 1.0μH to 2.2μH 0.85mm±0.2mm
Inductance: 4.7μH to 47μH 1.25mm±0.2mm
Unit Mass
(Typical value)
Inductance: 1.0μH to 2.2μH 0.010g
Inductance: 4.7μH to 47μH 0.016g
5. Testing Conditions
《Unless otherwise specified》 《In case of doubt》
Temperature : Ordinary Temperature / 15°C to 35°C Temperature
: 20°C ± 2°C
Humidity
: Ordinary Humidity / 25%(RH) to 85%(RH) Humidity : 60%(RH) to 70%(RH)
Atmospheric Pressure : 86kPa to 106kPa
ElectrodeFerrite
0.5±0.3
2.0±0.2
1.25±0.2
T
Spec No. JELF243B-0006Q-01 P.2/9
MURATA MFG.CO., LTD
Reference
Only
6. Electrical Performance
No. Item Specification Test Method
6.1 Inductance
Inductance shall meet item 3. Measuring Equipment:
Agilent 4291A or equivalent
(1mA)
Measuring Frequency: 1MHz
6.2 DC Resistance DC Resistance shall meet item 3. Measuring Equipment: Digital multi meter
DC resistance shall be measured after
putting chip coil between the terminal 2
under the condition of opening between
a and b.
Every measurement the terminal 1 shall
be shorted between a and b when
changing chip coil.
6.3 Self Resonant
Frequency
(S.R.F)
S.R.F shall meet item 3. Measuring Equipment:
Agilent 4291A or equivalent (1mA)
6.4 Rated Current Self temperature rise shall be limited
to 25°C max.
Inductance Change: within ±50%
The rated current is applied.
7. Mechanical Performance
No. Item Specification Test Method
7.1 Shear Test Chip coil shall not be damaged after
tested as follows.
Applied Direction
Force: 10N
Hold Duration: 5s±1s
Applied Direction: Parallel to PCB
7.2 Bending Test Substrate: Glass-epoxy substrate
(100mm×40mm×1.6mm)
(in mm)
Speed of Applying Force: 1mm / s
Deflection: 1mm
Hold Duration: 30s
7.3 Vibration Oscillation Frequency:
10Hz to 55Hz to 10Hz for 1 minute
Total Amplitude: 1.5mm
Testing Time:
A period of 2h in each of 3 mutually
perpendicular directions.
Digital multi meter
(TR6846 or equivalent)
terminal2terminal1
SW
a
b
F
Chip Coil
Substrate
45
R340
F
Deflection
45
Product
Pressure jig
Spec No. JELF243B-0006Q-01 P.3/9
MURATA MFG.CO., LTD
Reference
Only
No. Item Specification Test Method
7.4 Solderability The wetting area of the electrode
shall be at least 90% covered with
new solder coating.
Flux: Ethanol solution of rosin 25(wt)%
(Immersed for 5s to 10s)
Solder: Sn-3.0Ag-0.5Cu
Pre-Heating: 150°C±10°C / 60s to 90s
Solder Temperature: 240°C±5°C
Immersion Time: 3s±1s
7.5 Resistance to
Soldering Heat
Appearance: No damage
Inductance Change: within ±20%
Flux: Ethanol solution of rosin 25(wt)%
(Immersed for 5s to 10s)
Solder: Sn-3.0Ag-0.5Cu
Pre-Heating: 150°C±10°C / 60s to 90s
Solder Temperature: 270°C±5°C
Immersion Time: 10s±1s
Then measured after exposure in the room
condition for 24h±2h.
8. Environmental Performance
It shall be soldered on the substrate.
No. Item Specification Test Method
8.1 Heat Resistance Appearance: No damage
Inductance Change: within ±20%
Temperature: 85°C±2°C
Time: 1000h (+48h,-0h)
Then measured after exposure in the room
condition for 24h±2h.
8.2 Humidity Temperature: 40°C±2°C
Humidity: 90%(RH) to 95%(RH)
Time: 1000h (+48h, -0h)
Then measured after exposure in the room
condition for 24h±2h.
8.3 Temperature
Cycle
1 cycle:
1 step: -40°C±2°C / 30 min±3 min
2 step: Ordinary temp. / 10 min to 15 min
3 step: +85°C±2°C / 30 min to 3 min
4 step: Ordinary temp. / 10 min to15 min
Total of 10 cycles
Then measured after exposure in the room
condition for 24 h±2 h.
P1-P3P4-P6P7-P9

LQM21FN220N00L

Mfr. #:
Buy LQM21FN220N00L
Manufacturer:
Murata Electronics
Description:
Fixed Inductors 0805 22uH +/-30% DCR 0.35ohm
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet