B7AM-6BS
B7AM-6BS
5
3
CONFIGURATION
Device Connection
Note: The B7AM transmits input signals from SIG1 (input terminal) to SIG2 (output terminal). If an error results
while the B7AM is transmitting input signals, an error signal is output from the output side only.
ERR
ERR
Limit switch, proximity sensor, or photoelectric sensor
Sixteen-point output
Sixteen-point input
Indicator or valve
Indicatororvalve
Limit switch, proximity sensor, or photoelectric sensor
Sixteen-point input
Sixteen-point output
B7AM Mixed I/O System Configuration
Note: The Mixed I/O Link Modules are either 3 ms (typical, for high-speed models) or 19.2 ms (typical, for normal-speed models).
Use a Mixed I/O Link Module with the same transmission speed (I/O delay time).
Mixed I/O Link Module
(16 input and 16 output points)
Mixed I/O Link Module
(16 input and 16 output points)
B7AM
B7AM
Mixed I/O Link Module
(8 input and 8 output points)
Mixed I/O Link Module
(8 input and 8 output points)
Input
Output
Input
Output
Input
Output
Input
Output
B7AM
B7AM
