SPECIFICATION CONTROL DRAWING
REV:
1
DATE:
MAR 16, 2005
© 2005 Tyco Electronics Corporation. All rights reserved.
300 Constitution Drive
Menlo Park, CA 94025, USA
TITLE:
HEXASHIELD SWEPT ADAPTOR
FOR CODE 40 CONNECTORS
BANDSTRAP CLAMPING NUT
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN MILLIMETERS.
INCH DIMENSIONS ARE SHOWN IN
BRACKETS
Tyco Electronics reserves the right to amend this drawing at
any time. Users should evaluate the suitability of the
product for their application.
DOCUMENT NO.
HEX40-AY-90S-AYY-3-YY
DRAWN:
IRT
DATE:
MAR 05
CAGE CODE:
06090
DCR #
D050093
FILE:
87002/90S-3
SCALE:
NONE
SHEET:
2 OF 4
If this document is printed it becomes uncontrolled. Check for the latest revision.
TABLE OF DIMENSIONS
Order
Number
Shell Size
ØA Thread
Class 6H
ØB
Max
ØC
±0.10
D
Max
E
Max
Ferrule Quantity
Mil. Com.
[±.004”]
Std. Optional
09 A 09 M12 x 1 19.0 8.00 15.0 54.0 1 -
[0.75”]
[0.315”] [0.59”] [2.13”]
11 B 11 M15 x 1 22.0 13.5 16.0 56.0 2 -
[0.87”]
[0.531”] [0.63”] [2.20”]
13 C 13 M18 x 1 25.5 15.00 19.0 56.0 3 -
[1.00”]
[0.591”] [0.75”] [2.20”]
15 D 15 M22 x 1 30.5 18.00 19.0 59.0 5 -
[1.20”]
[0.709”] [0.75”] [2.32”]
17 E 17 M25 x 1 33.5 21.00 21.0 61.0 6 7
[1.32”]
[0.827”] [0.83”] [2.40”]
19 F 19 M28 x 1 37.0 24.00 23.0 63.0 7 8
[1.46”] [0.945”] [0.91”] [2.48”]
21 G 21 M31 x 1 38.5 27.00 23.0 65.0 9 11
[1.52”]
[1.063”] [0.91”] [2.56”]
23 H 23 M34 x 1 42.0 30.00 28.0 67.0 10 11, 12 13, 15
[1.65”]
[1.181”] [1.10”] [2.64”]
25 J 25 M37 x 1 46.5 33.00 28.0 67.0 12 13, 14, 15, 17, 18
[1.83”]
[1.299”] [1.10”] [2.64”]
PART NUMBERING
- PLATING CODE:
- MATERIAL CODE:
A = ALUMINIUM ALLOY
- CONNECTOR CODE NUMBER
HEX40
A B 21 A9 3
HEX40 = MIL-C-38999 SERIES III AND IV
- FERRULE QUANTITY CODE
- ORDER NUMBER
- BODY STYLE
90S = 90º SWEPT
DS
- 3 = BANDSTRAP CLAMPING NUT
- DS = DRILLED STAR - OPTIONAL - SEE NOTE 2
90S
C = ELECTROLESS NICKEL TO SAE-AMS-MIL-C-26074
B = CADMIUM OLIVE DRAB TO SAE-AMS-QQ-P-416
APPLICATION
- These adaptors are designed to be mounted on the following connectors:
MIL-C-38999 Series III and IV
- They are qualified to the Raychem specification RB-114, when installed on metallic Mil-Specification circular
connectors only.
- They are designed primarily for open wire bundle installation with overbraid, but are also designed to accept Raychem heat
shrink moulded parts where strain relief is required – see illustration on sheet 3.
