SPECIFICATION CONTROL DRAWING
REV:
1
DATE:
MAR 16, 2005
© 2005 Tyco Electronics Corporation. All rights reserved.
300 Constitution Drive
Menlo Park, CA 94025, USA
TITLE:
HEXASHIELD SWEPT ADAPTOR
FOR CODE 40 CONNECTORS
BANDSTRAP CLAMPING NUT
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN MILLIMETERS.
INCH DIMENSIONS ARE SHOWN IN
BRACKETS
Tyco Electronics reserves the right to amend this drawing at
any time. Users should evaluate the suitability of the
product for their application.
DOCUMENT NO.
HEX40-AY-90S-AYY-3-YY
DRAWN:
IRT
DATE:
MAR 05
CAGE CODE:
06090
DCR #
D050093
FILE:
87002/90S-3
SCALE:
NONE
SHEET:
4 OF 4
If this document is printed it becomes uncontrolled. Check for the latest revision.
3. Where the ferrule quantities required are standard, the item 4 - Star - is also standard.
If the optional quantity is selected then 2 items 4 will be supplied - one “split” and the other one standard.
See illustration on sheet 4 for a typical assembly and also refer to HEX02 S.C.D’s for further information if required.
EXAMPLE: FERRULE QUANTITY CODE -A13
-A13 = -A10 SPLIT STAR + -A3 STANDARD STAR
4. Assembly is to be permanently marked with Code Identity Number and Part Number.
(e.g. 06090 HEX40-AB-90S-21-A9-3)
