OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

ADG711BRUZ-REEL

P1-P3P4-P6P7-P9P10-P12P13-P15P16-P16
CMOS Low Voltage, 4 Ω Quad,
SPST Switches
ADG711/ADG712/ADG713
Rev. B
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 www.analog.com
Fax: 781.461.3113 ©2004–2011 Analog Devices, Inc. All rights reserved.
FEATURES
1.8 V to 5.5 V single supply
Low on resistance (2.5 Ω Typ)
Low on resistance flatness
−3 dB bandwidth > 200 MHz
Rail-to-rail operation
16-lead TSSOP and SOIC packages
Fast switching times: t
ON
=16 ns, t
OFF
=10 ns
Typical power consumption (< 0.01 μW)
TTL/CMOS compatible
Qualified for automotive applications
APPLICATIONS
USB 1.1 signal switching circuits
Cell phones
PDAs
Battery-powered systems
Communication systems
Sample hold systems
Audio signal routing
Video switching
Mechanical reed relay replacement
FUNCTIONAL BLOCK DIAGRAM
IN1
S1
D1
IN2
S2
D2
IN3
S3
D3
IN4
SWITCHES SHOWN FOR A LOGIC “1” INPUT
ADG711
S4
D4
00042-001
IN1
S1
D1
IN2
S2
D2
IN3
S3
D3
IN4
ADG712
S4
D4
IN1
S1
D1
IN2
S2
D2
IN3
S3
D3
IN4
ADG713
S4
D4
Figure 1.
GENERAL DESCRIPTION
The ADG711, ADG712, and ADG713 are monolithic CMOS
devices containing four independently selectable switches. These
switches are designed on an advanced submicron process that
provides low power dissipation yet gives high switching speed, low
on resistance, low leakage currents, and high bandwidth.
They are designed to operate from a single 1.8 V to 5.5 V supply,
making them ideal for use in battery-powered instruments and
with the new generation of DACs and ADCs from Analog Devices,
Inc. Fast switching times and high bandwidth make the parts
suitable for switching USB 1.1 data signals and video signals.
The ADG711, ADG712, and ADG713 contain four independent
single-pole/single-throw (SPST) switches. The ADG711 and
ADG712 differ only in that the digital control logic is inverted. The
ADG711 switches are turned on with a logic low on the appropriate
control input, while a logic high is required to turn on the switches
of the ADG712. The ADG713 contains two switches whose digital
control logic is similar to the ADG711, while the logic is inverted
on the other two switches.
Each switch conducts equally well in both directions when On. The
ADG713 exhibits break-before-make switching action.
The ADG711/ADG712/ADG713 are available in 16-lead TSSOP
and 16-lead SOIC packages.
PRODUCT HIGHLIGHTS
1. 1.8 V to 5.5 V Single-Supply Operation.
The ADG711, ADG712, and ADG713 offer high performance
and are fully specified and guaranteed with 3 V and 5 V
supply rails.
2. Ver y L ow R
ON
(4.5 Ω maximum at 5 V, 8 Ω maximum at 3 V).
At supply voltage of 1.8 V, R
ON
is typically 35 Ω over the
temperature range.
3. Low On Resistance Flatness.
4. −3 dB Bandwidth >200 MHz.
5. Low Power Dissipation. CMOS construction ensures low
power dissipation.
6. Fast t
ON
/t
OFF
.
7. Break-Before-Make Switching.
This prevents channel shorting when the switches are
configured as a multiplexer (ADG713 only).
8. 16-Lead TSSOP and 16-Lead SOIC Packages.
ADG711/ADG712/ADG713
Rev. B | Page 2 of 16
TABLE OF CONTENTS
Features .............................................................................................. 1
Applications....................................................................................... 1
Functional Block Diagram .............................................................. 1
General Description......................................................................... 1
Product Highlights ........................................................................... 1
Revision History ............................................................................... 2
Specifications..................................................................................... 3
Absolute Maximum Ratings............................................................ 5
ESD Caution.................................................................................. 5
Pin Configuration and Function Descriptions..............................6
Typical Performance Characteristics ..............................................7
Test Circuits........................................................................................9
Terminology .................................................................................... 11
Applications Information.............................................................. 12
Outline Dimensions ....................................................................... 13
Ordering Guide .......................................................................... 14
Automotive Products................................................................. 14
REVISION HISTORY
6/11—Rev. A to Rev. B
Updated Format..................................................................Universal
Changes to Features Section............................................................ 1
Changes to Absolute Maximum Ratings Table............................. 5
Changes to Ordering Guide .......................................................... 14
Added Automotive Products Section .......................................... 14
3/04—Rev. 0 to Rev. A
Added Applications.......................................................................... 1
Changes to Ordering Guide ............................................................ 4
Updated Outline Dimensions....................................................... 10
ADG711/ADG712/ADG713
Rev. B | Page 3 of 16
SPECIFICATIONS
V
DD
= +5 V ± 10%, GND = 0 V. All specifications −40°C to +85°C, unless otherwise noted.
Table 1.
Parameter +25°C −40°C to +85°C Unit Test Conditions/Comments
ANALOG SWITCH
Analog Signal Range 0 V to V
DD
V
On Resistance (R
ON
) 2.5 Ω typ V
S
= 0 V to V
DD
, I
S
= −10 mA;
4 4.5 Ω max See Figure 11
On Resistance Match Between 0.05 Ω typ V
S
= 0 V to V
DD
, I
S
= −10 mA
Channels (ΔR
ON
) 0.3 Ω max
On Resistance Flatness (R
FLAT(ON)
) 0.5 Ω typ V
S
= 0 V to V
DD
, I
S
= −10 mA
1.0 Ω max
LEAKAGE CURRENTS V
DD
= +5.5 V
Source Off Leakage I
S
(Off) ±0.01 nA typ V
S
= 4.5 V/1 V, V
D
= 1 V/4.5 V
±0.1 ±0.2 nA max See Figure 12
Drain Off Leakage I
D
(Off) ±0.01 nA typ V
S
= 4.5 V/1 V, V
D
= 1 V/4.5 V
±0.1 ±0.2 nA max See Figure 12
Channel On Leakage I
D
, I
S
(On) ±0.01 nA typ V
S
= V
D
= 1 V, or 4.5 V
±0.1 ±0.2 nA max See Figure 13
DIGITAL INPUTS
Input High Voltage, V
INH
2.4 V min
Input Low Voltage, V
INL
0.8 V max
Input Current
I
INL
or I
INH
0.005 μA typ V
IN
= V
INL
or V
INH
±0.1 μA max
DYNAMIC CHARACTERISTICS
1
t
ON
11 ns typ R
L
= 300 Ω, C
L
= 35 pF
16 ns max V
S
= 3 V; see Figure 14
t
OFF
6 ns typ R
L
= 300 Ω, C
L
= 35 pF
10 ns max V
S
= 3 V; see Figure 14
Break-Before-Make Time Delay, t
D
6 ns typ R
L
= 300 Ω, C
L
= 35 pF
(ADG713 Only) 1 ns min V
S1
= V
S2
= 3 V; see Figure 15
Charge Injection 3 pC typ V
S
= 2 V; R
S
= 0 Ω, C
L
= 1 nF; see Figure 16
Off Isolation −58 dB typ R
L
= 50 Ω, C
L
= 5 pF, f = 10 MHz
−78 dB typ R
L
= 50 Ω, C
L
= 5 pF, f = 1 MHz; see Figure 17
Channel-to-Channel Crosstalk −90 dB typ R
L
= 50 Ω, C
L
= 5 pF, f = 10 MHz; see Figure 18
Bandwidth −3 dB 200 MHz typ R
L
= 50 Ω, C
L
= 5 pF; see Figure 19
C
S
10 pF typ
C
D
10 pF typ
C
D
, C
S
(On) 22 pF typ
POWER REQUIREMENTS V
DD
= +5.5 V
I
DD
0.001 μA typ Digital inputs = 0 V or 5 V
1.0 μ max
1
Guaranteed by design, not subject to production test.
P1-P3P4-P6P7-P9P10-P12P13-P15P16-P16

ADG711BRUZ-REEL

Mfr. #:
Buy ADG711BRUZ-REEL
Manufacturer:
Analog Devices Inc.
Description:
Analog Switch ICs 2.5 Ohm 5.5V CMOS Quad SPST
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet