AS1101, AS1102, AS1103, AS1104
Low-Dropout LED Drivers
Data Sheet
www.austriamicrosystems.com Revision 1.5 1 - 13
1 General Description
The AS1101/AS1102/AS1103/AS1104 are LED drivers
designed to match current source bias for any color
LED, including white and blue. The devices can drive up
to 4 high-current LEDs, and the LED current is program-
mable using an external resistor (R
SET).
The AS1101 LED currents are 460 x I
SET (per LED, typ)
at an LED cathode voltage (VSAT) of 150mV and 650 x
I
SET (typ) at a VSAT of 1V, where ISET is the current
through R
SET connected to pin CTRL.
The AS1102, AS1103, and AS1104 LED currents are
230 x I
SET (per LED, typ) at a VSAT of 150mV and 325 x
I
SET (typ) at a VSAT of 1V.
The AS1101, AS1102, and AS1104 incorporate a chip-
enable feature via pin ON. When the devices are dis-
abled, the supply current drops to less than 1µA.
The AS1101, AS1102, and AS1103 are available in a
6-pin SC70 package; the AS1104 is available in a 8-pin
MSOP package.
Figure 1. Typical Application Diagrams
2 Key Features
! LED Drivers for Parallel-Connected LEDs
! Ultra-Low Voltage Drop: Less Than 150mV (for Li-
ion Battery Support)
! Analog and PWM Brightness Control
! Up to 80mA per LED (AS1101)
! Up to 40mA per LED (AS1102, AS1103, AS1104)
! No Electromagnetic Interference, No Switching-
Noise
! Current-Matching Requires No External Compo-
nents
! Active-Low Shutdown Mode (AS1101, AS1102,
and AS1103)
! Low Shutdown-Current: Less Than 1µA
! SC70-6 Package (AS1101, AS1102, and AS1103)
! MSOP-8 Package (AS1104)
3 Applications
The AS110x devices are ideal for LED displays and key-
board backlights, as well as lighting management units
for battery powered audio devices such as MP3 and CD
players, mobile and cordless phones, PDAs, portable
DVD players, and consumer electronics.
4 Diode Control with Enable
3 Diode Control with Enable
AS1103
4 Diode Control
V
IN
AS1101
ISET
2 Diode Control with Enable
V
IN
RSET
ENABLE
VSET
(3V)
VSAT
GND
GND
CTRL
I3/I4
I1/I2
ON
I
SET
RSET
VSET
(3V)
CTRL
VSATI1 I2 I3 I4
AS1102
ISET
VIN
RSET
ENABLE
VSET
(3V)
GND
CTRL
ON
VSATI1 I2 I3
AS1104
VIN
GND
VSATI1 I2 I3 I4
ISET
RSET
ENABLE
VSET
(3V)
CTRL
ON
www.austriamicrosystems.com Revision 1.5 2 - 13
AS1101/AS1102/AS1103/AS1104
Data Sheet - Pinout
4 Pinout
Pin Assignments
Figure 2. Pin Assignments – (Top View)
Pin Descriptions
Table 1. Pin Descriptions
Pin Number Pin Name Description
(see Figure 2)
CTRL
Sets LED current; connect to external resistor.
I1
Connect to cathode of LED.
I2
Connect to cathode of LED.
I3
Connect to cathode of LED.
I4
Connect to cathode of LED.
GND
Ground
ON
Device Enable Input.
CTRL
I2
I1
I3
I4
GND
1
2
3
8
7
6
ON
I3
I4
N/C
CTRL
I2
AS1104
CTRL
I2
I1
ON
I3
GND
1
2
3
6
5
4
CTRL
I1/I2
N/C
ON
I3/I4
GND
AS1101
5I14GND
8-Pin MSOP
6-Pin SC70
1
2
3
6
5
4
AS1102
1
2
3
6
5
4
AS1103
www.austriamicrosystems.com Revision 1.5 3 - 13
AS1101/AS1102/AS1103/AS1104
Data Sheet - Absolute Maximum Ratings
5 Absolute Maximum Ratings
Stresses beyond those listed in Table 2 may cause permanent damage to the device. These are stress ratings only,
and functional operation of the device at these or any other conditions beyond those listed in Electrical Characteristics
on page 4 is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reli-
ability.
The reflow peak soldering temperature (body temperature) is specified according to IPC/JEDEC J-STD-020C “Mois-
ture/Reflow Sensitivity Classification for Non-Hermetic Solid State Surface Mount Devices”.
Operating Conditions
Not applicable to AS1103.
Table 2. Absolute Maximum Ratings
Parameter Min Max Unit Comment
VI1, VI2, VI3, VI4, CTRL and ON Voltage to GND -0.3 5 V
Power Dissipated by Device at T
AMB = 85°C
200 mW SC70-6
250 mW MSOP-8
I1, I2, I3, I4 Steady State Current 100 mA
Package Body Temperature
260 ºC
Junction Temperature 150 ºC
Storage Temperature -65 150 ºC
Electrostatic Discharge Protection (ESD) Level 2 kV
Human Body Model;
Norm: MIL-STD883E 3015 methods.
Table 3. Recommended Operating Conditions
Parameter Min Typ Max Unit Comments
LED Cathode Voltage 0.15 0.6 3.6 V
Enable Voltage ON Mode
2.2 3.0 3.6 V
Enable Voltage OFF Mode
00.20.5V
Ambient Temperature -40 25 85 ºC

AS1104-T

Mfr. #:
Manufacturer:
ams
Description:
LED Lighting Drivers
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet