N.C.
N.C.
MAX6952
4-Wire Interfaced, 2.7V to 5.5V,
4-Digit 5
✕
7 Matrix LED Display Driver
20 ______________________________________________________________________________________
Board Layout
When designing a board, use the following guidelines:
1) The R
SET
connection to the ISET pin is a high-imped-
ance node, and sensitive to layout. Place R
SET
right
next to the ISET pin and route R
SET
directly to these
pins with very short tracks.
2) Ensure that the track from the ground end of R
SET
routes directly to GND pin 18 (PDIP package) or
GND pin 16 (SSOP package), and that this track is
not used as part of any other ground connection.
Chip Information
TRANSISTOR COUNT: 43,086
PROCESS: CMOS