Sheet No.: D1-A00501EN
7
GA1A2S100SS/GA1A2S100LY
■ Presence of ODCs (RoHS Compliance)
This product shall not contain the following materials, and they are not used in the production process for this
product:
• Regulated substances: CFCs, Halon, Carbon tetrachloride, 1,1,1-Trichloroethane (Methylchloroform). Specific
brominated flame retardants such as the PBBOs and PBBs are not used in this product at all.
This product shall not contain the following materials banned in the RoHS Directive (2002/95/EC).
• Lead, Mercury, Cadmium, Hexavalent chromium, Polybrominated biphenyls (PBB), Polybrominated diphenyl
ethers (PBDE).
• Content information about the six substances specified in “Management Methods for Control of Pollution
Caused by Electronic Information Products Regulation” (Chinese: )
NOTE: ✓ indicates that the content of the toxic and hazardous substance in all the homogeneous materials of the part is below the concentration limit requirement
as described in SJ/T 11363-2006 standard.
■ Packing Specifications
1. Box shape and general dimensions for GA1A2S100SS conform to those shown in Fig. 3, and to those shown
in Fig. 4 for GA1A2S100LY.
2. Inner packing is as shown in the Figures.
3. For GA1A2S100SS:
Average quantity per bag = 1000 pcs.
Average quantity per box = 2000 pcs.
4. For GA1A2S100LY:
Average quantity per sleeve = 100 pcs.
Average quantity per box = 2000 pcs.
5. Product mass: 0.1 g (approximately)
Category
Toxic and Hazdardous Substances
Lead (Pb) mercury (Hg) Cadmium (Cd)
Hexavalent
chromiun (Cr
6+
)
Polybrominated
biphenyls (PBB)
Polybrominated
diphenyl ethers
(PBDE)
OPIC Light Sensors ✓✓✓✓✓✓