T
T
T
S
S
S
2
2
2
Q
Q
Q
S
S
S
U
U
U
2
2
2
3
3
3
0
0
0
0
0
0
3
3
3
-
-
-
4
4
4
S
S
S
200PIN DDR2 800 SO-DIMM
1GB With 128Mx8 CL6
Transcend Information Inc.
Description
The TS2QSU23003-4S is a 128M x 64bits DDR2-800
SO-DIMM. The TS2QSU23003-4S consists of 8pcs
128Mx8bits DDR2 SDRAMs in FBGA packages and a
2048 bits serial EEPROM on a 200-pin printed circuit
board. The TS2QSU23003-4S is a Dual In-Line Memory
Module and is intended for mounting into 200-pin edge
connector sockets.
Synchronous design allows precise cycle control with the
use of system clock. Data I/O transactions are possible
on both edges of DQS. Range of operation frequencies,
programmable latencies allow the same device to be
useful for a variety of high bandwidth, high performance
memory system applications.
Features
• RoHS compliant products.
• JEDEC standard 1.8V ± 0.1V Power supply
•
VDDQ=1.8V ± 0.1V
• Max clock Freq: 400MHZ; 800Mb/s/Pin.
• Posted CAS
• Programmable CAS Latency: 4, 5, 6
•
Programmable Additive Latency: 0, 1, 2, 3, 4, 5
• Write Latency (WL) = Read Latency (RL)-1
• Burst Length: 4, 8(Interleave/nibble sequential)
• Programmable sequential / Interleave Burst Mode
•
Bi-directional Differential Data-Strobe (Single-ended
data-strobe is an optional feature)
• Off-Chip Driver (OCD) Impedance Adjustment
• MRS cycle with address key programs.
•
On Die Termination
• Refresh: Auto Refresh and Self Refresh
Average Refresh Period:
7.8us at lower then T
CASE
85 C
• Serial presence detect with EEPROM
Placement
PCB: 09-2300