Low Cost, Dual, High Current Output
Line Driver with Shutdown
ADA4311-1
Rev. 0
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 www.analog.com
Fax: 781.461.3113 ©2007 Analog Devices, Inc. All rights reserved.
FEATURES
High speed
−3 dB bandwidth: 310 MHz, G = +5, R
LOAD
= 50 Ω
Slew rate: 1050 V/μs, R
LOAD
= 50 Ω
Wide output swing
20.6 V p-p differential, R
LOAD
of 100 Ω from 12 V supply
High output current
Low distortion
−98 dBc typical at 1 MHz, V
OUT
= 2 V p-p, G = +5, R
LOAD
= 100 Ω
−72 dBc typical at 10 MHz, V
OUT
= 2 V p-p, G = +5, R
LOAD
= 100 Ω
Power management and shutdown
Control inputs CMOS level compatible
Shutdown quiescent current: 1 mA/amplifier
Selectable quiescent current: 1 mA to 11.8 mA/amplifier
APPLICATIONS
Home networking line drivers
Twisted pair line drivers
Power line communications (PLC)
Video line drivers
ARB line drivers
I/Q channel amplifiers
PIN CONFIGURATION
NC = NO CONNECT
+V
S
1
NC
2
OUT A
3
–IN A
4
+IN A
5
OUT B
10
–IN B
9
+IN B
8
PD1
7
PD0
6
DA4311-1
06940-001
Figure 1. Thermally Enhanced, 10-Lead MINI_SO_EP
TYPICAL APPLICATION
V
MID
*
ADA4311-1
ADA4311-1
1/2
1/2
MID
=
V
CC
–
GND
2
06940-002
Figure 2. Typical PLC Driver Application
GENERAL DESCRIPTION
The ADA4311-1 is comprised of two high speed, current
feedback operational amplifiers. The high output current, high
bandwidth, and fast slew rate make it an excellent choice for
broadband applications requiring high linearity performance
while driving low impedance loads.
The ADA4311-1 incorporates a power management function
that provides shutdown capabilities and the ability to optimize
the quiescent current of the amplifiers. The CMOS-compatible,
power-down control pins (PD1 and PD0) enable the ADA4311-1
to operate in four different modes: full power, medium power,
low power, and complete power-down. In power-down mode, the
quiescent current drops to only 1.0 mA/amplifier, while the outputs
go to a high impedance state.
The ADA4311-1 is available in a thermally enhanced, 10-lead
MSOP with an exposed paddle for improved thermal conduction.
The ADA4311-1 is rated to work in the extended industrial
temperature range of −40°C to +85°C.
