1
FN8248.4
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774
| Intersil (and design) is a registered trademark of Intersil Americas LLC.
XDCP is a trademark of Intersil Americas Inc. Copyright Intersil Americas LLC. 2005, 2008, 2015. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.
X9429
Low Noise/Low Power/2-Wire Bus
Single Digitally Controlled Potentiometer
(XDCP™)
The X9429 integrates a single digitally controlled
potentiometer (XDCP) on a monolithic CMOS integrated
circuit.
The digital controlled potentiometer is implemented using 63
resistive elements in a series array. Between each element
are tap points connected to the wiper terminal through
switches. The position of the wiper on the array is controlled
by the user through the 2-wire bus interface. The
potentiometer has associated with it a volatile Wiper Counter
Register (WCR) and a four non-volatile Data Registers that
can be directly written to and read by the user. The contents
of the WCR controls the position of the wiper on the resistor
array though the switches. Power-up recalls the contents of
the default data register (DR0) to the WCR.
The XDCP can be used as a three-terminal potentiometer or
as a two terminal variable resistor in a wide variety of
applications including control, parameter adjustments, and
signal processing.
Features
Single Voltage Potentiometer
64 Resistor Taps
2-wire Serial Interface for Write, Read, and Transfer
Operations of the Potentiometer
Wiper Resistance, 150W Typical at 5V
Non-Volatile Storage of Multiple Wiper Positions
Power-on Recall. Loads Saved Wiper Position on Power-up.
Standby Current < 3µA Max
•V
CC
: 2.7V to 5.5V Operation
2.5kW, 10kW Total Pot Resistance
Endurance: 100,000 Data Changes per Bit per Register
100 yr. Data Retention
14 Ld TSSOP, 16 Ld SOIC
Low Power CMOS
Pb-free available (RoHS compliant)
Block Diagram
V
H
/R
H
V
L
/R
L
V
W
/R
W
POT
V
CC
V
SS
2-WIRE
BUS
ADDRESS
DATA
STATUS
WRITE
READ
WIPER
64-TAPS
TRANSFER
10k
INC/DEC
CONTROL
INTERFACE
BUS
INTERFACE
CONTROL
POWER-ON RECALL
WIPER COUNTER
REGISTER (WCR)
DATA REGISTERS
4 BYTES
AND
Data Sheet October 16, 2015
2
FN8248.4
October 16, 2015
Ordering Information
PART
NUMBER
PART
MARKING
V
CC
LIMITS
(V)
POTENTIOMETER
ORGANIZATION
(kΩ)
TEMP
RANGE (°C)
PACKAGE
(RoHS Compliant)
PKG
DWG. #
X9429WS16Z* (Note)
(No longer available,
recommended replacement:
X9429WS16IZT1)
X9429WS Z 5 ±10% 10 0 to +70 16 Ld SOIC (300 mil) M16.3
X9429WS16IZ* (Note) X9429WS Z I -40 to +85 16 Ld SOIC (300 mil) M16.3
X9429WV14Z* (Note) X9429 WV Z 0 to +70 14 Ld TSSOP (4.4mm) M14.173
X9429WV14IZ* (Note) X9429 WV Z I -40 to +85 14 Ld TSSOP (4.4mm) M14.173
X9429WS16Z-2.7* (Note)
(No longer available,
recommended replacement:
X9429WS16IZT1)
X9429WS ZF 2.7 to 5.5 10 0 to +70 16 Ld SOIC (300 mil) M16.3
X9429WS16IZ-2.7* (Note)
(No longer available,
recommended replacement:
X9429WS16IZT1)
X9429WS ZG -40 to +85 16 Ld SOIC (300 mil) M16.3
X9429WV14Z-2.7* (Note) X9429 WVZF 0 to +70 14 Ld TSSOP (4.4mm) M14.173
X9429WV14IZ-2.7* (Note) X9429 WVZ G -40 to +85 14 Ld TSSOP (4.4mm) M14.173
*Add “T1” suffix for tape and reel. Please refer to TB347 for details on reel specifications.
NOTE: These Intersil Pb-free plastic packaged products employ special Pb-free material sets, molding compounds/die attach materials, and 100%
matte tin plate plus anneal (e3 termination finish, which is RoHS compliant and compatible with both SnPb and Pb-free soldering operations). Intersil
Pb-free products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020.
X9429
3
FN8248.4
October 16, 2015
Detailed Functional Diagram
Circuit Level Applications
Vary the Gain of a Voltage Amplifier
Provide Programmable DC Reference Voltages for
Comparators and Detectors
Control the Volume in Audio Circuits
Trim Out the Offset Voltage Error in a Voltage Amplifier
Circuit
Set the Output Voltage of a Voltage Regulator
Trim the Resistance in Wheatstone Bridge Circuits
Control the Gain, Characteristic Frequency and
Q-factor in Filter Circuits
Set the Scale Factor and Zero Point in Sensor Signal
Conditioning Circuits
Vary the Frequency and Duty Cycle of Timer ICs
Vary the DC Biasing of a Pin Diode Attenuator in RF
Circuits
Provide a Control Variable (I, V, or R) in Feedback Circuits
System Level Applications
Adjust the Contrast in LCD Displays
Control the Power Level of LED Transmitters in
Communication Systems
Set and Regulate the DC Biasing Point in an RF Power
Amplifier in Wireless Systems
Control the Gain in Audio and Home Entertainment
Systems
Provide the Variable DC Bias for Tuners in RF Wireless
Systems
Set the Operating Points in Temperature Control Systems
Control the Operating Point for Sensors in Industrial
Systems
Trim Offset and Gain Errors in Artificial Intelligent Systems
V
CC
V
SS
WIPER
COUNTER
REGISTER
(WCR)
R
H
/V
H
R
L
/V
L
DATA
R
W
/V
W
INTERFACE
AND
CONTROL
CIRCUITRY
CONTROL
64--TAPS
10k
POWER-ON RECALL
DR0 DR1
DR2 DR3
A0
SCL
SDA
A2
WP
A3
X9429

X9429WS16IZ

Mfr. #:
Manufacturer:
Renesas / Intersil
Description:
Digital Potentiometer ICs SINGLE XDCP 10KOHM 64 TAP I2C
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union