KNH21C104DA3TS

7/9 No.EE21-KHDC000-02
KYOCERA CORPORATION
( Figure 6 )
K
t
G
H
F
A
B
E
C
D
J
Taping packaging specification
1) Apply
This specification applies to Kyocera chip EMI filter [KNH21 series] taping.
2) Tape
2 1 Material Plastic
2 2 Dimensions
3) Taping configuration
3 1 Unit by reel
Taping for 1 reel is 3,000 pcs STD. Also, components should be placed in consecutively
without any vacancy.
3 2 Reel dimensions
Symbol
Dimensions
+0
A d180
-3.0
B D60
+1.0
-0
C d13 +/- 0.5
D d21 +/- 0.8
E 2.0 +/- 0.5
+0
W1 9.3
-0.15
W2
11.4±1.0
Symbol A B C D E
Dimensions 1.45+-0.2 2.25+-0.2 8.0+-0.3 3.5+-0.05 1.75+-0.1
F G H J t K
+0.1 +0.07
4.0+-0.1 2.0+-0.05 4.0+-0.1 1.5
-0
0.25+-0.05 1.15
-0.05
(mm)
B
W1
W2
E
A
C
D
8/9 No.EE21-KHDC000-02
KYOCERA CORPORATION
400mm (Min.)
Leader portion
Blank portion
Components
placement
Blank
portion
40mm (Min)
40mm (Min)
Running direction
ْ
1
6
5
~
1
8
0
Running direction
Pulling direction
3 3 Leader portion and blank portion
As shown in drawing 8, there is space for leader portion and blank portion.
Furthermore, the pulling strength of carrier tape and top tape is 45 +- 35 g
as shown in drawing 9.
3 4 Reel marking
The following contents are marked on one side of reel.
a) Part number b) Lot number c) Quantity d) Customer name
3 5 Other case marking
Adequate packaging is done to avoid damages during delivery.
The other cases have the following marking.
a) Part number b) Lot number c) Quantity d) Shipment date
e) Customer name
( Figure 8 )
( Figure 9 )
(Figure - 9)
9/9 No.EE21-KHDC000-02
KYOCERA CORPORATION
Limitation of use
Make sure to contact us in advance before considering using this product for the
following applications which would require particularly high reliability due to possibility
of direct harm to lives and/or properties.
(1)Use in aerospace or space
(2)Use in seabed or underground
(3)Use in control of power station firepower, waterpower, nuclearpower, etc
(4)Use in medical treatments including instruments related to lifesaver
(5)Use in transportation cars, trains, ships, etc.
(6)Use in traffic controls
(7)Use in protection/prevention against disasters or crimes
(8)Use in information processing
(9)Others Use in the equivalent applications mentioned above
This product is designed and manufactured with intention to be used in general electronic
equipments for standard applications but with no intention to be used in the following environments
which may affect performance of this product. Therefore, make sure to have enough confirmation
on performance and reliability of this product in the following environments in advance before use.
(1)Use in liquids such as water, oil, medical liquid, organic solvent, etc
(2)Use in direct sunshine, rain, wind, or dust/dirt
(3)Use in sea wind or place with corrosive gas such as CI2, H2S, NH3, SO2, NO2, etc
(4)Use in environment with strong static electricity or electromagnetic wave
(5)Use in located nearly to heat generating part or flammable materials such as vinyl wires
(6)Use in condensation
(7)Use in sealed or coated by materials such as resin, etc

KNH21C104DA3TS

Mfr. #:
Manufacturer:
Kyocera Electronic Components
Description:
Multilayer Ceramic Capacitors MLCC - SMD/SMT 25volts 0.1uF 2A 2.0 x 1.25
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union