NTS0102-Q100 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2013. All rights reserved.
Product data sheet Rev. 1 — 27 February 2013 10 of 21
NXP Semiconductors
NTS0102-Q100
Dual supply translating transceiver; open drain; auto direction sensing
[1] t
en
is the same as t
PZL
and t
PZH
.
t
dis
is the same as t
PLZ
and t
PHZ
.
[2] Delay between OE going LOW and when the outputs are actually disabled.
[3] Skew between any two outputs of the same package switching in the same direction.
t
THL
HIGH to LOW
output transition
time
A port 1.9 7.2 1.9 6.9 1.8 6.7 ns
B port 2.2 9.8 2.4 8.4 2.6 8.3 ns
t
sk(o)
output skew time between channels
[3]
- 0.8 - 0.8 - 0.8 ns
t
W
pulse width data inputs 20 - 20 - 20 - ns
f
data
data rate - 50 - 50 - 50 Mbps
V
CC(A)
= 3.3 V 0.3 V
t
PHL
HIGH to LOW
propagation delay
A to B - - - 3.0 - 3.9 ns
t
PLH
LOW to HIGH
propagation delay
A to B - - - 5.3 - 5.5 ns
t
PHL
HIGH to LOW
propagation delay
B to A - - - 3.2 - 4.2 ns
t
PLH
LOW to HIGH
propagation delay
B to A - - - 3.2 - 3.3 ns
t
en
enable time OE to A; B - - - 200 - 200 ns
t
dis
disable time OE to A; no external load
[2]
- - - 20 - 20 ns
OE to B; no external load
[2]
- - - 20 - 20 ns
OE to A - - - 280 - 280 ns
OE to B - - - 220 - 220 ns
t
TLH
LOW to HIGH
output transition
time
A port - - 2.3 7.0 1.9 7.4 ns
B port - - 2.5 8.0 2.1 9.3 ns
t
THL
HIGH to LOW
output transition
time
A port - - 2.0 6.8 1.9 6.3 ns
B port - - 2.3 9.3 2.4 9.5 ns
t
sk(o)
output skew time between channels
[3]
- - - 0.8 - 0.8 ns
t
W
pulse width data inputs - - 20 - 20 - ns
f
data
data rate - - - 50 - 50 Mbps
Table 11. Dynamic characteristics for temperature range 40 C to +125 C
[1]
…continued
Voltages are referenced to GND (ground = 0 V); for test circuit see Figure 6; for wave forms see Figure 4 and Figure 5.
Symbol Parameter Conditions V
CC(B)
Unit
2.5 V 0.2 V 3.3 V 0.3 V 5.0 V 0.5 V
Min Max Min Max Min Max
NTS0102-Q100 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2013. All rights reserved.
Product data sheet Rev. 1 — 27 February 2013 11 of 21
NXP Semiconductors
NTS0102-Q100
Dual supply translating transceiver; open drain; auto direction sensing
13. Waveforms
[1] V
CCI
is the supply voltage associated with the input.
[2] V
CCO
is the supply voltage associated with the output.
Measurement points are given in Table 12
.
V
OL
and V
OH
are typical output voltage levels that occur with the output load.
Fig 4. The data input (An, Bn) to data output (Bn, An) propagation delay times
001aal918
t
PLH
t
PHL
V
M
V
M
Bn, An
output
An, Bn
input
V
I
GND
V
OH
V
OL
t
THL
t
TLH
90 %
10 %
Measurement points are given in Table 12.
V
OL
and V
OH
are typical output voltage levels that occur with the output load.
Fig 5. Enable and disable times
Table 12. Measurement points
[1][2]
Supply voltage Input Output
V
CCO
V
M
V
M
V
X
V
Y
1.8 V 0.15 V 0.5V
CCI
0.5V
CCO
V
OL
+ 0.15 V V
OH
0.15 V
2.5 V 0.2 V 0.5V
CCI
0.5V
CCO
V
OL
+ 0.15 V V
OH
0.15 V
3.3 V 0.3 V 0.5V
CCI
0.5V
CCO
V
OL
+ 0.3 V V
OH
0.3 V
5.0 V 0.5 V 0.5V
CCI
0.5V
CCO
V
OL
+ 0.3 V V
OH
0.3 V
NTS0102-Q100 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2013. All rights reserved.
Product data sheet Rev. 1 — 27 February 2013 12 of 21
NXP Semiconductors
NTS0102-Q100
Dual supply translating transceiver; open drain; auto direction sensing
[1] V
CCI
is the supply voltage associated with the input.
[2] For measuring data rate, pulse width, propagation delay and output rise and fall measurements, R
L
= 1 M; for measuring enable and
disable times, R
L
= 50 K.
[3] V
CCO
is the supply voltage associated with the output.
Test data is given in Table 13
.
All input pulses are supplied by generators having the following characteristics: PRR 10 MHz; Z
O
= 50 ; dV/dt 1.0 V/ns.
R
L
= Load resistance.
C
L
= Load capacitance including jig and probe capacitance.
V
EXT
= External voltage for measuring switching times.
Fig 6. Test circuit for measuring switching times
V
M
V
M
t
W
t
W
10 %
90 %
0 V
V
I
V
I
negative
pulse
positive
pulse
0 V
V
M
V
M
90 %
10 %
t
f
t
r
t
r
t
f
001aal963
V
EXT
V
CC
V
I
V
O
DUT
C
L
R
L
R
L
G
Table 13. Test data
Supply voltage Input Load V
EXT
V
CC(A)
V
CC(B)
V
I
[1]
t/V C
L
R
L
[2]
t
PLH
, t
PHL
t
PZH
, t
PHZ
t
PZL
, t
PLZ
[3]
1.65 V to 3.6 V 2.3 V to 5.5 V V
CCI
1.0ns/V 15pF 50k, 1 M open open 2V
CCO

NTS0102DP-Q100H

Mfr. #:
Manufacturer:
NXP Semiconductors
Description:
Translation - Voltage Levels Transceiver Dual Supply
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet