NJM2594
- 2 -
!
ABSOLUTE MAXIMUM RATINGS
(Ta=25°C)
PARAMETER SYMBOL RATINGS UNIT
Supply Voltage V
+
14.0 V
Power Dissipation P
D
250(SSOP-8), 300(DMP-8) mW
Operating Temperature T o p r - 40 to +85 °C
Storage Temperature T s t g - 40 to +125 °C
Output 2 Drive Current I d 10 mA
!
RECOMMENDED OPERATIONAL CONDITION
(Ta=25°C)
PARAMETER SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNIT
Supply Voltage V
+
4.5 5.0 9.0 V
!
ELECTRICAL CHARACTERISTICS
(Ta=25°C,V
+
=5.0V)
PARAMETER SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNIT
Current Consumption I c c No Signal - 11 14 mA
Conversion Gain
note(3)
G c
note(1)
- 2.0 0 + 2.0 dB
Signal Leakage Level
note(4)
L s
note(1)
- -35 -20 dB
Carrier Leakage Level
note(5)
L c
note(1)
- -40 -20 dB
Intermodulation
note(6)
I M D
note (2)
- - 60 - dB
Signal Input Resistance R s
- 600 - Ω
Signal Input Capacitance C s
note (7)
- 3.8 - pF
Carrier Input Resistance R c
- 1200 - Ω
Carrier Input Capacitance C c
note (7)
- 2.2 - pF
Output Resistance R o OUTPUT1 terminal - 350 - Ω
Output Capacitance C o OUTPUT1 terminal
note (7)
- 2.6 - pF
Notes :
(1) Input signal : Fs=1.75MHz, 70mVrms(-10dBm)
Carrier signal : Fc=28.25MHz,100mVrms(-7dBm)
Desired output signal : fundamental carrier upper-sideband output, Fd=30MHz
(2) Input signal 1 : Fs1=1.75MHz, 42.5mVrms(-14.42dBm)
Input signal 2 : Fs2=2.00MHz, 42.5mVrms(-14.42dBm)
Carrier signal : Fc=28.25MHz,100mVrms(-7dBm)
(3) The ratio of desired output signal level to input signal level
(4) The ratio of output signal at input signal frequency to desired output signal
(5) The ratio of output signal at carrier signal frequency to desired output signal
(6) The ratio of 29.75MHz Intermodulation signal to desired output signal
(7) Measured at 10MHz
