661GILF

ICS661
PRECISION AUDIO CLOCK SOURCE CLOCK SYNTHESIZER
IDT™ / ICS™
PRECISION AUDIO CLOCK SOURCE 4
ICS661 REV F 051310
Absolute Maximum Ratings
Stresses above the ratings listed below can cause permanent damage to the ICS661. These ratings, which are
standard values for IDT commercially rated parts, are stress ratings only. Functional operation of the device at these
or any other conditions above those indicated in the operational sections of the specifications is not implied.
Exposure to absolute maximum rating conditions for extended periods can affect product reliability. Electrical
parameters are guaranteed only over the recommended operating temperature range.
Recommended Operation Conditions
DC Electrical Characteristics
Unless stated otherwise, VDD = 3.3 V ±10%, Ambient Temperature -40 to +85° C
Item Rating
Supply Voltage, VDD 5.5 V
All Inputs and Outputs -0.5 V to VDD+0.5 V
Ambient Operating Temperature -40 to +85° C
Storage Temperature -65 to +150° C
Junction Temperature 125° C
Soldering Temperature 260° C
Parameter Min. Typ. Max. Units
Ambient Operating Temperature -40 +85 ° C
Power Supply Voltage (measured in respect to GND) +3.0 +3.6 V
Parameter Symbol Conditions Min. Typ. Max. Units
Operating Voltage VDD 3.0 3.6 V
VDDO 1.8 VDD V
VDDR 1.8 VDD V
Input High Voltage V
IH
2V
Input Low Voltage V
IL
0.8 V
Output High Voltage V
OH
I
OH
= -4 mA VDD-0.4 V
Output High Voltage V
OH
I
OH
= -20 mA 2.4 V
Output Low Voltage V
OL
I
OL
= 20 mA 0.4 V
Supply Current IDD No Load 25 mA
Short Circuit Current I
OS
Each output ±65 mA
Nominal Output Impedance Z
OUT
20
Input Capacitance Input pins 7 pF
Internal Pull-up Resistor 120 k
ICS661
PRECISION AUDIO CLOCK SOURCE CLOCK SYNTHESIZER
IDT™ / ICS™
PRECISION AUDIO CLOCK SOURCE 5
ICS661 REV F 051310
AC Electrical Characteristics
Unless stated otherwise, VDD = 3.3 V ±10%, Ambient Temperature -40 to +85° C
Thermal Characteristics
Parameter Symbol Conditions Min. Typ. Max. Units
Crystal Frequency 27 28 MHz
Output Clock Rise Time t
OR
20% to 80%, 15 pF load 1.5 ns
Output Clock Fall Time t
OF
80% to 20%, 15 pF load 1.5 ns
Output Duty Cycle t
OD
At VDD/2, 15 pF load 45 49 to 51 55 %
Jitter, Short term Reference clock off 175 ps p-p
Jitter, Short term Reference clock on 175 ps p-p
Jitter, Long term
Reference clock off; 10
us delay
300 ps p-p
Jitter, Long term
Reference clock on; 10
us delay
300 ps p-p
Single Sideband Phase
Noise
Reference clock off; 10
kHz offset
-110 dBc
Single Sideband Phase
Noise
Reference clock on; 10
kHz offset
-110 dBc
Actual Mean Frequency
Error versus Target
0ppm
Parameter Symbol Conditions Min. Typ. Max. Units
Thermal Resistance Junction to
Ambient
θ
JA
Still air 78 ° C/W
θ
JA
1 m/s air flow 70 ° C/W
θ
JA
3 m/s air flow 68 ° C/W
Thermal Resistance Junction to Case θ
JC
37 ° C/W
ICS661
PRECISION AUDIO CLOCK SOURCE CLOCK SYNTHESIZER
IDT™ / ICS™
PRECISION AUDIO CLOCK SOURCE 6
ICS661 REV F 051310
Package Outline and Package Dimensions (16-pin TSSOP, 4.40 mm Body, 0.65 mm Pitch)
Package dimensions are kept current with JEDEC Publication No. 95, MO-153
Ordering Information
"LF" suffix to the part number are the Pb-Free configuration and are RoHS compliant.
While the information presented herein has been checked for both accuracy and reliability, Integrated Device Technology (IDT) assumes
no responsibility for either its use or for the infringement of any patents or other rights of third parties, which would result from its use. No
other circuits, patents, or licenses are implied. This product is intended for use in normal commercial applications. Any other applications
such as those requiring extended temperature range, high reliability, or other extraordinary environmental requirements are not
recommended without additional processing by IDT. IDT reserves the right to change any circuitry or specifications without notice. IDT
does not authorize or warrant any IDT product for use in life support devices or critical medical instruments.
Part / Order Number Marking Shipping Packaging Package Temperature
661GILF 661GILF Tubes 16-pin TSSOP -40 to +85° C
661GILFT 661GILF Tape and Reel 16-pin TSSOP -40 to +85° C
INDEX
AREA
1 2
16
D
E1
E
SEATING
PLANE
A1
A
A2
e
- C -
b
aaa C
c
L
Millimeters Inches
Symbol Min Max Min Max
A--1.20--0.047
A1 0.05 0.15 0.002 0.006
A2 0.80 1.05 0.032 0.041
b 0.19 0.30 0.007 0.012
C 0.09 0.20 0.0035 0.008
D 4.90 5.1 0.193 0.201
E 6.40 BASIC 0.252 BASIC
E1 4.30 4.50 0.169 0.177
e 0.65 Basic 0.0256 Basic
L 0.45 0.75 0.018 0.030
α 0° 8° 0° 8°
aaa -- 0.10 -- 0.004

661GILF

Mfr. #:
Manufacturer:
IDT
Description:
Clock Generators & Support Products PRECISION AUDIO CLOCK SOURCE
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet