74AHC1G4210
10-stage divider and oscillator
Rev. 3 — 25 April 2018 Product data sheet
1 General description
74AHC1G4210 is a 10-stage divider and oscillator. It consists of a chain of 10 flip-flops.
Each flip-flop divides the frequency of the previous flip-flop by two, consequently the
74AHC1G4210 counts up to 2
10
= 1024. The single inverting stage (X1 to X2) functions
as a crystal oscillator or an input buffer for an external oscillator. When used as a buffer
the output X2 should be left floating. The frequency of the output (Q) is the frequency
applied to X1 divided by 1024. The divider advances on the negative-going transition of
X1.
The X1 input is overvoltage tolerant. This feature allows the use of this device as a
voltage level translator in mixed voltage environments.
2 Features and benefits
• Wide supply voltage range from 2.0 V to 5.5 V
• Overvoltage tolerant inputs to 5.5 V
• High noise immunity
• CMOS low power dissipation
• ESD protection:
– HBM JESD22-A114F: exceeds 2000 V
– CDM JESD22-C101E: exceeds 1000 V
• Latch-up performance exceeds 100 mA per JESD 78 Class II
• Specified from -40 °C to +85 °C and from -40 °C to +125 °C
3 Ordering information
Table 1. Ordering information
PackageType number
Temperature range Name Description Version
74AHC1G4210GW -40 °C to +125 °C TSSOP5 plastic thin shrink small outline package;
5 leads; body width 1.25 mm
SOT353-1
4 Marking
Table 2. Marking codes
Type number Marking
[1]
74AHC1G4210GW C1
[1] The pin 1 indicator is located on the lower left corner of the device, below the marking code.
