MP3360 – HIGHLY INTEGRATED PHOTO FLASH CHARGER AND IGBT DRIVER
MP3360 Rev. 0.9 www.MonolithicPower.com 4
1/29/2010 MPS Proprietary Information. Unauthorized Photocopy and Duplication Prohibited.
© 2010 MPS. All Rights Reserved.
PIN FUNCTIONS
Pin Name Function
1 IGBTIN Logic Input Pin for IGBT Drive.
2 IGBTOUT Output Drive for IGBT Gate. Connect this pin to the gate of the IGBT.
3 SW Switch Pin. This is the drain of the internal power switch.
4 RDYB Open-Drain Power-Ready Output. RDYB becomes low when the output voltage is reached.
5 FB Feedback Pin. Its trip voltage is 298V
6 CHG
Charge Enable Pin. A low to high transition on this pin puts the part into power delivery
mode. Once the target voltage is reached, the part will stop charging the output. Toggle
this pin will start charging again. Bring this pin low will terminate the power delivery and put
the part in shutdown. This pin can be also used to program the peak current regulation. See
the description for current programming.
7 PGND Power Ground
8 AGND Analog ground. Tie it directly to local ground plane.
9 VIN
Input Supply Pin. Connect it to system supply voltage. Bypass VIN to GND with a 0.1uF or
greater ceramic capacitor.
10 VIGBT
2.7V LDO output. VIGBT is the supply voltage for IGBT gate driver. Bypass VIGBT with
0.1uF cap to GND.