AXL E PB DI8 DO4 2A M12 6M
8433_en_03 PHOENIX CONTACT 5
Digital inputs
Number of inputs 8 (EN 61131-2 types 1 and 3)
Connection method M12 connector, double occupancy
Connection method 2, 3, 4-wire
Nominal input voltage 24 V DC
Nominal input current typ. 3 mA
Sensor current per channel typ. 0.75 mA (from U
S
)
Total sensor current max. 0.6 A (per device)
Input voltage range "0" signal -30 V DC ... 5 V DC
Input voltage range "1" signal 11 V DC ... 30 V DC
Input filter time < 1000 µs
Permissible conductor length to the sensor 30 m
Overload protection, short-circuit protection of sensor supply Yes
Digital outputs
Number of outputs 4
Connection method M12 connector, (A-coded)
Connection method 2, 3-wire
Nominal output voltage 24 V DC (from voltage U
A
)
Maximum output current per channel 2 A
Nominal load, ohmic 12 W (48 Ω; with nominal voltage)
Nominal load, inductive 12 VA (1.2 H; 48 Ω; with nominal voltage)
Signal delay max. 150 µs (when switched on)
max. 200 µs (when switched off)
Switching frequency max. 5500 per second (with at least 50mA load current)
Switching frequency max. 1 per second (with inductive load)
Limitation of the voltage induced on circuit interruption -28 V ... -17 V
Output voltage when switched off max. 1 V
Output current when switched off max. 20 µA
Behavior with overload Auto restart
Reverse voltage resistance to short pulses Reverse voltage proof
Overcurrent shut-down min. 2.2 A
Overload protection, short-circuit protection of outputs Electronic
Configuration data
ID number 0E60
Input address area 8 Bit
Output address area 8 Bit
