Data Sheet ADG211A/ADG212A
Rev. C | Page 9 of 16
TERMINOLOGY
R
ON
Ohmic resistance between the out and S terminals.
R
ON
Match
Difference between the R
ON
of any two channels.
I
S
(Off)
Source terminal leakage current when the switch is off.
I
D
(Off)
Drain terminal leakage current when the switch is off.
I
D
(On)
Leakage current that flows from the closed switch into the body.
V
D
(V
S
)
Analog voltage on the D, S terminals.
C
S
(Off)
Switch input capacitance off condition.
C
D
(Off)
Switch output capacitance off condition.
C
IN
Digital input capacitance.
C
D
, C
S
(On)
Input or output capacitance when the switch is on.
t
ON
Delay time between the 50% and 90% points of the digital input
and switch on condition.
t
OFF
Delay time between the 50% and 90% points of the digital input
and switch off condition.
t
OPEN
Off time measured between 50% points of both switches, which
are connected as a multiplexer when switching from one
address state to another.
V
INL
Maximum input voltage for a logic low.
V
INH
Minimum input voltage for a logic high.
I
INL
(I
INH
)
Input current of the digital input.
V
DD
Most positive voltage supply.
V
SS
Most negative voltage supply.
V
L
Logic supply voltage.
I
DD
Positive supply current.
I
SS
Negative supply current.
