OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

MKP385215250JI02W0

P1-P3P4-P6P7-P9P10-P12P13-P15P16-P18
MKP385
www.vishay.com
Vishay BCcomponents
Revision: 03-Jun-15
4
Document Number: 28174
For technical questions, contact: dc-film@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MOUNTING
Normal Use
The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoliers are designed for
mounting on printed-circuit boards by means of automatic insertion machines.
For detailed tape specifications refer to “Packaging Information” www.vishay.com/doc?28139
Specific Method of Mounting to Withstand Vibration and Shock
In order to withstand vibration and shock tests, it must be ensured that the stand-off pips are in good contact with the
printed-circuit board:
• For original pitch = 15 mm the capacitors shall be mechanically fixed by the leads
• For larger pitches the capacitors shall be mounted in the same way and the body clamped
Space Requirements on Printed-Circuit Board
The maximum length and width of film capacitors is shown in the drawing:
For products with pitch 15 mm, w = l = 0.3 mm and h = 0.1 mm
For products with 15 mm < pitch 27.5 mm, w =l = 0.5 mm and h = 0.1
For products with pitch = 37.5 mm w = l = 0.7 mm and h = 0.5 mm
For products with pitch = 52.5 mm, w = l = 1 mm and h = 0.5 mm
Eccentricity as in drawing. The maximum eccentricity is smaller than or equal to the lead diameter of the product concerned.
SOLDERING CONDITIONS
For general soldering conditions and wave soldering provile we refer to the document “Soldering Conditions Vishay Film
Capacitors”: www.vishay.com/doc?28171
STORAGE TEMPERATURE
Storage temperature: T
stg
= -25 °C to +35 °C with RH maximum 75 % without condensation.
RATINGS AND CHARACTERISTICS REFERENCE CONDITIONS
Unless otherwise specified, all electrical values apply to an ambient free temperature of 23 °C ± 1 °C, an atmospheric pressure
of 86 kPa to 106 kPa and a relative humidity of 50 % ± 2 %.
For reference testing, a conditioning period shall be applied over 96 h ± 4 h by heating the products in a circulating air oven at
the rated temperature and a relative humidity not exceeding 20 %.
Eccentricity
w
max.
= w + Δ
h
max.
= h + Δ
I
max.
= I + Δ
Seating plane
MKP385
www.vishay.com
Vishay BCcomponents
Revision: 03-Jun-15
5
Document Number: 28174
For technical questions, contact: dc-film@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
CHARACTERISTICS
Capacitance as a function of ambient temperature (typical curve)
(1 kHz)
Max. DC and AC voltage as function of temperature
Impedance as a function of frequency (typical curve)
Maximum allowed component temperature rise (T)
as a function of ambient temperature (T
amb
)
Insulation resistance as a function of ambient temperature
(typical curve)
- 60 - 20
0
20
50
100
130
T
amb
(°C)
- 8
- 6
- 4
- 2
0
2
4
ΔC/C (%)
- 60
- 20 20 60 100
T
amb
(°C)
factor
0.0
0.2
0.4
0.6
0.8
1.0
1.2
10
3
10
2
10
0
10
-3
f (Hz)
10
5
10
4
10
6
10
7
10
8
Impedance (Ω)
10
-1
10
-2
10
1
100 nF
10 µF
82 µF
0.47 nF
12
8
4
0
T
amb
(°C)
300 60 90 130
ΔT (°C)
10
6
10
5
10
4
T
amb
(°C)
300 60 90 120
RC (s)
MKP385
www.vishay.com
Vishay BCcomponents
Revision: 03-Jun-15
6
Document Number: 28174
For technical questions, contact: dc-film@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Max. RMS voltage as function of frequency (160 V)
Max. RMS voltage as function of frequency (250 V)
Max. RMS voltage as function of frequency (400 V)
Max. RMS voltage as function of frequency (160 V)
Max. RMS voltage as function of frequency (250 V)
Max. RMS voltage as function of frequency (400 V)
10
3
10
2
10
1
f (Hz)
10
3
10
2
10
4
10
5
10
6
AC voltage
(V)
T
amb
≤
85 °C, 160 V
DC
47 µF
10 µF
2.2 µF
1 µF
100 nF
22 nF
10
3
10
2
10
1
f (Hz)
10
3
10
2
10
5
10
6
10
7
AC voltage
(V)
T
amb
≤
85 °C, 250 V
DC
47 µF
22 µF
4.7 µF
1 µF
100 nF
22 nF
2.2 µF
10
4
10
3
10
2
10
1
f (Hz)
10
3
10
2
10
4
10
5
10
7
AC voltage
(V)
T
amb
≤
85 °C, 400 V
DC
10
6
22 µF
10 µF
2.2 µF
1 µF
470 nF
100 nF
10 nF
10
3
10
2
10
1
f (Hz)
10
3
10
2
10
4
10
5
10
6
AC voltage
(V)
85 °C < T
amb
≤
110°C, 160 V
DC
47 µF
10 µF
2.2 µF
1 µF
100 nF
22 nF
10
3
10
2
10
1
f (Hz)
10
3
10
2
10
4
10
5
AC voltage
(V)
10
6
10
7
85 °C < T
amb
≤
110 °C, 250 V
DC
47 µF
22 µF
4.7 µF
2.2 µF
1 µF
100 nF
22 nF
10
3
10
2
10
1
f (Hz)
10
3
10
2
10
4
10
5
10
7
AC voltage
(V)
85 °C
<
T
amb
≤
110 °C, 400 V
DC
22 µF
10 µF
2.2 µF
470 nF
100 nF
1 µF
10 nF
10
6
P1-P3P4-P6P7-P9P10-P12P13-P15P16-P18

MKP385215250JI02W0

Mfr. #:
Buy MKP385215250JI02W0
Manufacturer:
Description:
Film Capacitors MKP385 0,0015 F 5% 2500Vdc Pitch22,5
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet